PWM Solar Charge Controller,20A 12/24V,LS2024B

Loading Port:Tianjin

Payment Terms:TT or LC

Min Order Qty:-

Supply Capability:-

Product Description:

Descriptions: 

 

A charge controller, or charge regulator is basically a voltage and/or current regulator to keep batteries from overcharging. It regulates the voltage and current coming from the solar panels going to the battery. Most "12 volt" panels put out about 16 to 20 volts, so if there is no regulation the batteries will be damaged from overcharging. Most batteries need around 14 to 14.5 volts to get fully charged.

Features:


Three system voltage configuration : 12V, 24V or 12V/24V auto work
·High efficiency PWM charging with temperature compensation
·3 LEDs shows PV charging, battery and load status
·External temperature sensor interface
·RS-485 bus communication
·Open standard Modbus communication protocol
·Software update function
·Diversified load control modes : Manual, Light ON/OFF, Light ON+ Timer, Time Control
·Battery type selection: Gel, sealed, flooded and User type
·Real-time monitor
·Programmable parameters
·LVD  or SOC load disconnect function
·Energy statistics function

 

Electronic Protections:

 

·PV short circuit
·PV reverse polarity
·Battery overcharge
·Battery over discharge
·Battery reverse polarity
·Load short circuit
·Load overload
·Overheating

 

Specification:

 

Electrical parameters

LS1024B

LS2024B

LS3024B

Nominal System Voltage

12 / 24V auto work

Rated Battery Current

10A

20A

30A

Maximum battery voltage

50V

Grounding

Common positive

Self-consumption

8.4mA(12V)7.8mA(24V)

Temp. compensation

-3mV//2V25 ref

Equalize charging voltage

Sealed: 14.6V,  Flooded: 14.8V,  User-defined: 9~17V

Boost charging voltage

Gel: 14.2V,  Sealed: 14.4V,  Flooded: 14.6V, User-defined: 9~17V

Float charging voltage

Gel /Sealed /Flooded: 13.8V,  User-defined: 9~17V

Low voltage reconnect voltage

Gel /Sealed /Flooded: 12.6V,  User-defined: 9~17V

Low voltage disconnect voltage

Gel /Sealed /Flooded: 11.1V, User-defined: 9~17V

Working temp.

-35~+55

Humidity

≤95% (NC)

Enclosure

IP30

Dimension

138.6x69.3x37mm

159.6x81.4x47.8mm

200.6x101.3x57mm

Terminal

4mm2

10mm2

10mm2

Net weight

0.13kg

0.3kg

0.5kg