Loading Port:Nanjing
Payment Terms:TT/LC
Min Order Qty:50sets set
Supply Capability:1-3000sets/month set/month
Main features of H-Series PV controller:
Professional MCU microprocessor control, the real charge and discharge of intelligent control;
Total negative control mode, multi-channel input matrix control of solar cells
High pressure, long life of the IGBT as the main switching device controller
Brightest charge voltage detection with "bad back" control to prevent switching into oscillation state
Control circuit and main circuit completely isolated, with a high anti-interference ability
Protection function, operation status, fault LED indicate
Low-power display state, further reducing its loss
Enables parallel operation of multiple machines
Against reverse battery
Remote monitoring (optional)
Optional Configuration of H-Series PV controller:
RS485/RS232 Remote monitoring;
Increase output control
Technical Data of H-Series PV controller:
Voltage level | 12V | 24V | 48V | 110V | 220V |
Rated current range | 30A~100A | 30A~100A | 20A~80A | 20A~60A | 20A~50A |
Battery input | |||||
Rated input voltage (VDC) | 12 | 24 | 48 | 110 | 220 |
Under-voltage protection (VDC) | ≤10.8 | ≤21.6 | ≤43.2 | ≤99.0 | ≤198.0 |
Recovery voltage (VDC) | ≥12.3 | ≥24.6 | ≥49.2 | ≥115.0 | ≥230.0 |
Over-voltage protection (VDC) | ≥16.5 | ≥33.0 | ≥66.0 | ≥150.0 | ≥290.0 |
Over-voltage recovery (VDC) | ≤15.5 | ≤31.0 | ≤62.0 | ≤142.0 | ≤284.0 |
Solar energy input | |||||
Max. open circuit voltage (VDC) | 25.0 | 50.0 | 100.0 | 230.0 | 450.0 |
Max. charge current (A) | 100 | 100 | 80 | 60 | 50 |
Allow PV array points (N) | 5 | ||||
Float voltage (VDC) | 13.7 | 27.4 | 54.8 | 125.0 | 251.0 |
Overcharge protection voltage (VDC) | ≥14.4 | ≥28.8 | ≥57.6 | ≥132.0 | ≥264.0 |
Charge recovery voltage (VDC) | ≤13.2 | ≤26.4 | ≤52.8 | ≤121.0 | ≤242.0 |
DC output | |||||
Rated output voltage (VDC) | 12 | 24 | 48 | 110 | 220 |
Max. output current (A) | 100A | 100A | 80A | 60A | 50A |
Overload capacity | 120% overload 60 seconds off the output / 150% overload for 10 seconds to close the output | ||||
Protection function | Battery over charge, over discharge the battery, the battery reversed,solar cells reversed , counter-attack by night charge , overheating, output overload, output short circuit | ||||
Serial communication | RS485(A、B) | ||||
Mechanical dimensions, work environment | |||||
Size ( D x W x H ) | 350 x 500 x180 | ||||
Reference weight (Kg) | 25 | ||||
Protection level | IP41 | ||||
Max. working altitude (m) | ≤3000 | ||||
Temperature range (℃) | -20 ~ +65 |
H-Series PV controller
H-Series PV controller
Packaging & Delivery of H-Series PV controller:
Packaging: Wooden box or Customized
Delivery: Depends on the quantity or Customized