High Quality PE Protective Film White Color S60-30W

Product Description:

General Information of High Quality White Color PE Protective Film S60-30W 

1. Application: Mirror finish stainless steel need sophisticated protection. Usually 2layers white color PE protective film are used, with inner one S60-30W and outer layer a little sticky S100-30W. So that the steel is well protected from dirt and scratch during production, transportation and installation.

2. White color and transparent color are popular for mirror finish stainless steel surface protection. Transparent blue color, black & white color, red color and so on available as per customers' requirements.

3. The choice of surface protective film depends on the surface: material and roughness. Tell us what surface you want to protect and we will recommend proper film to you.

Technical Data of High Quality White Color PE Protective Film S60-30W   

Item Number: S60-30W (first layer); S100-30W (second layer)

Carrier: PE (polyethylene) film

Thickness: 30micron (0.03mm)

Peel Adhesion: 60g/25mm; 100g/25mm

Adhesive: solvent acrylic

Color: white

Temperature Resistance: 60C 48hours no residue

Elongation: ≥250%

Inner Diameter: 3" (76mm)

Length: within 3000meter

Widh: within 1.5meter

Recommended jumbo roll size: 1.0m x 1000m

Packing of High Quality White Color PE Protective Film S60-30W 

Wrapped with kraft paper or carton.

Remarks of High Quality White Color PE Protective Film S60-30W 

A. The data above are typical results and subject to change without notice.

B. Tolerance: 5%

C. The products should be stored at room temperature and be kept away wet and/or heat source.

D. It is essential, the surface of film must be clean, dry, and free of grease and oil.

E. The users should take test and do trial-application on the above product before coming into application so as to witness and ensure suitability for their special purpose and technique