High Quality Transparent Color PE Protective Film S60-50T

Product Description:

General Information of High Quality Transparent Color PE Protective Film S60-50T

1. Application: Mirror finish stainless steel need sophisticated protection. Usually 2layers white color 30micron PE protective film are used. But you can also use 1layer transparent PE protective film which is thicker, such as 50micron. So that the steel is well protected from dirt and scratch during production, transportation and installation.

2. White color and transparent color are popular for mirror finish stainless steel surface protection. Transparent blue color, black & white color, red color and so on available as per customers' requirements.

3. The choice of surface protective film depends on the surface: material and roughness. Tell us what surface you want to protect and we will recommend proper film to you.

Technical Data of High Quality Transparent Color PE Protective Film S60-50T 

Item Number: S60-50T

Carrier: PE (polyethylene) film

Thickness: 50micron (0.05mm)

Peel Adhesion: 60g/25mm

Adhesive: solvent acrylic

Color: transparent

Temperature Resistance: 60C 48hours no residue

Elongation: ≥250%

Inner Diameter: 3" (76mm)

Length: within 3000meter

Widh: within 1.5meter

Recommended jumbo roll size: 1.0m x 1000m

Packing of High Quality Transparent Color PE Protective Film S60-50T

Wrapped with kraft paper or carton.

Remarks of High Quality Transparent Color PE Protective Film S60-50T

A. The data above are typical results and subject to change without notice.

B. Tolerance: 5%

C. The products should be stored at room temperature and be kept away wet and/or heat source.

D. It is essential, the surface of film must be clean, dry, and free of grease and oil.

E. The users should take test and do trial-application on the above product before coming into application so as to witness and ensure suitability for their special purpose and technique