IKEA Packaging Tape - High Performance 60 Micron

Product Description:

CONSTRUCTION:

Carrier: BOPP film

Adhesive: Water based acrylic adhesive.

TYPICAL PHYSICAL PROPERTIES:

Total Thickness (adhesives + carrier): 60± 2 um

Initial Tack (11mm steel ball): ³ 18#

180^O Peel Adhesion (to steel): ³ 0.5 kgf /25mm

Holding Power: ³ 24 hrs

Tensile Strength: ³ 30 N/cm

Elongation: ≤180%

PACKING:

Core I.D.: 3” (76mm±1)

Jumbo Roll：1280mm x 4000m

Cut Roll: As per customer’s requirements

Application:

Carton sealing & packing, Light duty packaging, bundling, holding, and other office & household use.

REMARKS:

1.     The data above are typical results and subject to change without notice.

2.     Tolerance: Weight and Thickness: ±10%; Width: ±3mm;

Length: Cut Roll & Log Roll ±0.3m, Jumbo Roll ±0.5%.

3.     The products should be stored at room temperature and be kept away wet and/or heat source.

4.     It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.

5.     The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.