Loading Port:Shanghai
Payment Terms:TT OR LC
Min Order Qty:15 m.t.
Supply Capability:30000 m.t./month
General Information
The CMAX super-duty silica bricks for glass melting tank is characterized by high purity, less impurity, good corrosion resistance, higher bulk density, complete phase transformation, lower residual quartz, high RUL, lower thermal expansion and stable volume at high temperature. This leads to increase in service life of glass furnace and reduction in energy consumption. These products have found wide application in crown and key areas and been highly appreciated by clients.
Features
1) A variety of specifications available.
2) Satisfy various technical request.
3) Lower medium spoilage.
4) Good insulation performance and high temperature resistance.
5) High compressive strength.
6) Used in all electric products and electric heating products.
7) OEM, ODM and OBM are welcomed.
Application
Glass melting tank
Glass furnace
Hot-Blast Stoves
Performance | |||||
Item | Unit | 95 Al2O3 | 96 Al2O3 | 99 Al2O3 | |
Physical Characteristics | Bulk density | g/cm3 | 3.6 | 3.6 | 3.9 |
Water absorption | % | 0 | 0 | 0 | |
Mechanical Characteristics | Flexural strength | Mpa | 320 | 340 | 360 |
Hardness Vickers | Gpa | 12.2 | 13.5 | 15.6 | |
Elastic modulus | Gpa | 280 | 320 | 370 | |
Poisson’s ratio | - | 0.22 | 0.23 | 0.23 | |
Thermal Characteristics | Linear expansion coefficient | (200C-5000C) 10-6/0C | 7.1 | 7.2 | 8 |
Thermal conductivity | w/(m.k) | 16 | 24 | 32 | |
Specific Heat | *10-3J/(kg*K) | 0.78 | 0.78 | 0.9 | |
Electrical Characteristics | Dielectric constant (1MHZ) | - | 9 | 9.4 | 9.9 |
Dielectric loss angle | *10-4 | 15 | 5 | 1 | |
Dielectric strength | *106V/m | 12 | 15 | 15 | |
Processing technology | |||||
Process range (mm) | |||||
Outside Diameter | 1---300 | ||||
Inside Diameter | 0.5---300 | ||||
Length | 0.5---1200 | ||||
Accuracy of working (mm) | |||||
Perpendicularity | 0.01 | ||||
Concentricity | 0.01 | ||||
Roundness | 0.005 | ||||
Straightness | 0.005 | ||||
Parallelism | 0.01 | ||||
Planeness | 0.005 | ||||
Roughness | 0.05 | ||||
Fit clearance | 0.005 |