Loading Port:Shanghai
Payment Terms:TT OR LC
Min Order Qty:1 set
Supply Capability:4 set/month
PC Cap Making Machine Application for LED Light
LED Light PC Cap Making Machine Production Line Feature:
Reasonable equipment design, compact construction, simple operation
Equipment with high degree automatic, cost less expenses
Electrical equipment, Hydraulic system, Seal parts and Lubrication system adopt the components of famous factory in the world, with low failure rate.
To achieve the best quality guarantee, no matter the appearance and internal, automatic PC Cap Making Machine rate of quality goods is above 99%.
LED Light PC Cap Making Machine Technical Characteristic:
LED Light PC Cap Making Machine adopt European technology, control the hydraulic system with pressure and flow double proportion. The speed of pressure can adjust nonpolarly, high stability, exchange control the electrical system with man-machine interface. Operating surface has a machinery safety configuration, two electrical safety configuration to ensure the safety of operators.
PLC+touch screen, making the operation easy. Automatic malfunction alarm with selfdiagnosis, making the malfunction clear at a glance.
Center input die head, eliminating the knit line completely and making it easy to change the material and color.
Double linear rolling motion guider in moving, opening and closing mold, making the clamping force equally distributed, so the cut is smoother.
Control the hydraulic system with imported proportional valve, ensuring the action steady, accurate and energy saving.
High speed and efficient plasticizing system, mixing well and ensuring the produce purity.
LED Light PC Cap Making Machine Parameter:
Specifications | Unit | Parameters |
Max container capacity | L | 20 |
Extruder System |
|
|
Screw Diameter | mm | 82 |
Screw L/D ratio | L/D | 30:1 |
Screw Speed | rev. / min. | 10~50 |
Plasticizing Capacity | Seconds/die. | 60 |
Number of heating zone barrel | zone | 5 |
Extruder driving Power of barrel | KW | 34 |
Max Injection quantity | L | 1.5 |
Die Head |
|
|
Max die diameter | mm | 130 |
Number of heating zone | zone | 4 |
Extruder driving power | KW | 8.7 |
Clamping Device |
|
|
Platen Size(WxH） | mm | 440 x 600 |
Platen opening stroke | mm | 330~780 |
Clamping force | KN | 210 |
Next blowing Device |
|
|
Blowing the head off and landing trip | mm | 120 |
Manual control Blowing the head off and landing trip | mm | 80 |
Manipulator |
|
|
Take pieces of travel | mm | 1000 |
Framework |
|
|
Lift travel | mm | 250 |
Hydraulic System |
|
|
Rated pressure of big pump | Mpa | 14 |
Rated flow of big pump | L/min | 180 |
Motor power of Hydraulic pumps | KW | 45 |
Parison Controlling Of Hydraulic Servo System |
|
|
Rated pressure | Mpa | 6 |
Rated Flow | L/min | 22 |
Motor power of Hydraulic pumps | KW | 4 |
Pneumatical System |
|
|
Air source pressure | Mpa | 1 |
Working pressure | Mpa | 0.8 |
Air consumption | M3 / min. | 0.6 |
Electrical Control System |
|
|
Water Supply |
|
|
Water supply pressure | Mpa | 0.3 |
Power Supply | ||
Voltage | V | AC380V±10% |
Frequency | HZ | 50 |
Wire |
| 3Phase |
Total of rated power | KW | 91.7 |
Average power consumption | KW.h | 45 |
Total weight | Ton | 11 |
Dimension of machine （Lx W x H） | m | 5.3×2.7×4.5 |
LED Light PC Cap Making Machine Parts Picture:
LED Light PC Cap Making Machine Drawing Picture:
LED Light PC Cap Making Machine Electrical Parts Photo:
LED Light PC Cap Making Machine Products Photo:
