Masking Tape M-UV1 For Painting

Product Description:

General Information Of Masking Tape M-UV1 For Painting

1. This is the UV resistant type of masking tape, which can be UV resistant for 1 day.

2. The standard jumbo size is 737mm x 1700m and we are able to supply different cut rolls according to customer's requirements.

3. For jumbo rolls, we normally pack them in corrugated board first and then load into the container directly without pallets. Altogether there will have 80 jumbo rolls in a 20' container.

4. For cut rolls, we normally shrink several rolls together and then put certain rolls in one carton. Finally all the cartons are loaded in the container directly with or without pallets.

5. Special requirements will be satisfied after communications.

 

Technical Data Of Masking Tape M-UV1 For Painting

Carrier: Crepe Paper

Adhesive: Solvent based acrylic adhesive.

Total Thickness (adhesive + crepe paper): 0.140 +/- 0.02 mm

Initial attack: ≥10#

180O Peel Adhesion (to steel): ≥0.28KN/m

Holding Power: ﹥15 hours

Tensile Strength: ﹥5.0kg/15mm

Temperature range: -10～95℃

UV resistance: 1day

Removable test: Bond to glass, wall and other things for 24 hours, or bond to stainless steel and put it in 80℃ for one hour, it is well-sticky and no residual left.

Storage life: 12months

 

Packing Of Masking Tape M-UV1 For Painting

Core I.D.: 3” (76mm +/- 1)

Jumbo Roll：737mm x 1700m

Cut Roll: As per customer’s requirements

 

Service Of Masking Tape M-UV1 For Painting

We have a group of professional technicians and workers with rich experience, who are dedicated in this industry and try to offer best service to every customer. We are undertaking the idea of “reliable quality, reasonable price, and good service” to meet the needs of every customer. Your success is our goal, and your content is our hope. We keep pursuing “exact production, high-quality service”.

Handing and Storage Of Masking Tape M-UV1 For Painting

Handling procedures：Caution with edge of sheet. After using this sheet, wash hands.

Storage procedures：Keep dry and cool and away from direct sunlight for quality.

Stability and Reactivity Of Masking Tape M-UV1 For Painting

Chemical Stability: Stable and non-reactivity

Conditions to Avoid: Away from high temperature

Incompatibility with various substances：specific materials／condition to avoid．

Hazardous Decomposition Products：Thermal decomposition will produce mainly C02，and slightly CO．

Hazardous Polymerization：Can not occur

 

Transport Information Of Masking Tape M-UV1 For Painting

Not a hazardous material for DOT shipping．

UN：None

Packaging sign：According to the buyer

Packaging Category：No information found/According to the buyer．

Shipping Marks: According to the buyer

 

Remarks Of Masking Tape M-UV1 For Painting

The data above are typical results and subject to change without notice.

Tolerance: Weight and Thickness: 10%; Width: 3mm; Length: Cut Roll & Log Roll 0.3m, Jumbo Roll 0.5%.

The products should be stored at room temperature and be kept away wet and/or heat source.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.

The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.