Packaging & Delivery
| Packaging Details: | SEAWORTHY EXPORT PACKING |
|---|---|
| Delivery Detail: | WITHIN 40DAYS AFTER ORDER |
Specifications
.cold working tool steel 1.2210 /DIN 115CrV3, AISI L2.ISO9001:.quality guaranted
.Manufacturer,UT% before delivery
Quick Details
| Standard: | AISI,ASTM,BS,DIN,GB,JIS | Place of Origin: | Shanghai China (Mainland) | Brand Name: | Unite Steel |
| Technique: | Hot Rolled | Application: | Tool Steel Bar | Alloy Or Not: | Is Alloy |
| Special Use: | Mold Steel | Type: | Alloy Steel Bar |
Specifications
Round bar:
Diameter : 1mm-2000mm
Square bar:
Size: 50mm * 50mm-600mm *600mm
STEEL GRADES:115CrV3
Chemical composition % of the ladle analysis of grade 115CrV3
| C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) | Mo(%) | V(%) | Ti(%) |
| 1.10-1.25 | 0.15-0.30 | 0.20-0.40 | Max 0.030 | Max 0.030 | 0.50-0.80 | 0.07-0.12 | |||
| W(%) | N(%) | Cu(%) | Co(%) | Pb(%) | B(%) | Nb(%) | Al(%) | Ta(%) | Other(%) |
Mechanical properties of grade 115CrV3
Technological properties of grade 115CrV3
Hardness and heat treatment specification of grade 115CrV3
| Annealing hardness HBS | Cold pull hardness HBS | Preheating temperature °C | Quenching temperature °C | Holding time min | Hardening medium | Temper temperature °C | After tempering hardness ≥HRC | |
| salt-bath furnace | controlled atmosphere furnace | |||||||
| 235 | 262 | 788 | 1191 | 1204 | 5~15 | air cooling | 522 | 60 |
| Steel plate/Sheet thickness / mm | σb MPa | σs ≥/MPa | δ Samples from the standard for 50 mm (2 in) | 180 ° of cold bending test | |
| longitudinal | horizontal | ||||
| Hot-rolled/Cold rolling:5 - 150 | 520 | 415 | 16~18 | 2a | 3.5a |
| Note: (1) listed in the table apex diameter (d), to steel thickness (a) multiples said. (2) in the ASTM A6 standard specified scope can meet any additional conditions. (3) from the standard for 50 mm (2 in). Mechanical properties Mechanische Eigenschaften Caracteristiques mecaniques ReH Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite d’elasticite minimale Rm Tensile strength / Zugfestigkeit / Resistance a la traction A Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimal J Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc | |||||
Round bar OR wire :
Diameter : 1mm-2000mm
Square bar:
Size: 50mm * 50mm-600mm *600mm
Plate steel/flat bar:
Size: Thickness: 0.1mm-800mm Width: 10mm to 1500mm
Tube/pipe:
Size: OD: 6-219mm WT: 1-35 mm.
Cold-rolled sheet: Thickness: 2-5mm Width:1000mm Length: 2000mm
Hot-rolled sheet: Thickness:6-80mm Width: 210-610mm
Length: We can supply any length based on the customer's requirement.
Forging/hot rolling/ extrusion of steel.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirement.
UTS according to SEP 1921 C/c,D/d,E/e;A388 or GB/T 6402
