Loading Port:China Main Port
Payment Terms:TT or LC
Min Order Qty:20 Tons m.t.
Supply Capability:5000 Tons per Month m.t./month
Houseweres, High gloss toys, Low thickness articles Blown film extrusion, Lamination, Extrusion coating, Injection molding.
| products: LDPE Low density polyethylene | type: Virgin LDPE/recycling LDPE | packing: 25 kgs / bag |
| application: plastic industry |
Packaging & Delivery
| Packaging Detail: | 25 kgs / bag or as your required |
| Delivery Detail: | within 15 days after received TT payment |
Specifications
1.Low density polyethylene LDPE factory
2.ISO 9001
3.Virgin, recycling type
4.Competitive price
5.Used for plastic, etc...
It's a low-density, crosslinked, unfilled polyethylene compound desighed for medium cable insulating.
This compound has an extremely low lever of contamination. It's recommend to use are extremely low lever of contamination. It's recommend to use as XLPE insulation for crosslinked polyethylene
Max conductor temperature: 90° C
Tensile Strength: ≥ 13.5Mpa
Elongation at Break: ≥ 350%
Brittleness temperature: ≤ -76° C
Ageing Properties (Test temperature 135° C, 168h)
Max Variation of tensile strength:
Max Variation of elongation at break: ± 20% ± 20%
Hot Set Test (200° C, 15min, 0.2MPa)
Max elongation under load:
Max permanent elongation after cooling: ≤ 100%≤ 5%
Dielectric constant (20° C, 50Hz): ≤ 2.35
Dissipation factor (20° C, 50Hz): ≤ 1.0x10(-3)
Volume Resistance (20° C): ≥ 1.0x10(16)Ω . Cm
Dielectric strength: ≥ 25Mv/m
LDPE | STANDARD | STANDARD |
Melt Flow Rate(g/10min) (1: 21.6kg) | 0.1 | 9.0-13.0 |
Density(g/cm 3 ) | 0.95 | 0.948-0.951 |
Power Ash% | 0.01 | 0.04 |
Tensile Strength(MPa) | 22 | 23 |
Elongation At Break% | 600 | 600 |
Environmental stress-cracking | 1500 | 1500 |
Application:
Houseweres, High gloss toys, Low thickness articles Blown film extrusion, Lamination, Extrusion coating, Injection molding
Test item | Unit | Index |
Tensile strength | MPa | >=13.5 |
Rupture elongation | % | >=350 |
Impact brittle temperature |
| -76 |
Impact brittle performance | Failure rate | <=15/30 |
Heating aging temperature |
| 135+-2 |
Duration | H | 168 |
Tensile strength change rate | % | +-20 |
Rupture elongation change rate | % | +-20 |
Hot drawing | % | <=80 |
Keep permanent deformation after cooling | % | <=5 |
Gel contents | % | >=80 |
Dielectric loss factor |
| <=1X10-3 |
Relative dielectric constant |
| <=2.35 |
Volume resistivity | O.m | >=1X1014 |
Dielectric strength | MV/m | >=25 |
Packaging Detail: In 25 kg PP bag, 20 mts per 20`FCL or as you required
Properties:
It's a low-density, crosslinked, unfilled polyethylene compound desighed for medium cable insulating.
This compound has an extremely low lever of contamination. It's recommend to use are extremely low lever
of contamination. It's recommend to use as XLPE insulation for crosslinked polyethylene.
Application: Houseweres, High gloss toys, Low thickness articles Blown film extrusion, Lamination,
Extrusion coating, Injection molding
