Loading Port:Tianjin
Payment Terms:TT OR LC
Min Order Qty:1000 g/m²
Supply Capability:100000 g/m²/month
Packaging Detail: | roll with cardboard core,bale with plastic film |
Delivery Detail: | within 20 days |
1.reducing civil engeineering overall costs
2. cost efficiency
3.high strength,low elongation
4.corrosion resistance pervious
Brief introduction:
Polyyester multifilament yarns are woven into a stable network.A woven geotextile retain its relative structure during handling,placement and long time service. As needed, geotextile material shall be added stabilizers to make the filaments resistant to ultraviolet light,oxidation and heat. Reducing civil engineering overall costs increases construction project life filtration separation reinforcement,erosion control high strength,low elongation corrosion resistance perviousness easy transportation dimensional stabilization speed construction cost efficiency
Polyester Woven Geotextile
Material: Polyyester
Color: white
Width:1.06-3.7M
Weight: 270gsm-1700gsm
Tensile strength: 50KN/M-800KN/M
permeability:0.01-0.8S-1
Pore size: 0.06-0.7mm
Elongation: Polypropylene<15%< span="">
interweave method:plain, twill etc.
Benefits:filtration,separation,reinforcement,erosion control
Civil and environmental applications: including highways, port facilities, reservoir, transport construction,
waste and chemical management, subgrade engineering, coastal protection works, peninsula shoal
engineering, subsurface drainage ,pile jacketing etc.
MAIN PRODUCTS
(1) High Strength Woven Geotextile
(2)Pile Jacketing
(3)Geotextile Curtain (Silt Curtain)
(4)Concrete Revetment Mattress
(5)Geotextile tube,Geotextile bag
Physical properties | Test method | Unit | Typical Value | |||||||
Material | Polyester/PET | |||||||||
Color | White | |||||||||
Unit Weight | 270 | 360 | 540 | 430 | 810 | 1200 | 1200 | 1700 | ||
Tensile Strength at break MD | ASTM D 4595 | KN/M | 100 | 150 | 150 | 200 | 400 | 300 | 500 | 800 |
Tensile Strength at break CD | ASTM D 4595 | KN/M | 50 | 50 | 150 | 50 | 50 | 300 | 100 | 50 |
Elongation at break MD | ASTM D 4595 | % | <=15< span=""> | |||||||
Elongation at break CD | ASTM D 4595 | % | <=15< span=""> | |||||||
Permitivity | ASTM D 4491 | S-1 | 0.01-0.8 | |||||||
Pore opening size O90 | ASTM D 4751 | mm | 0.06-0.7 |
FAQ:
♦ Payment terms: by T/T or L/C |
♦ MOQ:2000 SQM |
♦ If you are interested in our products ,pls advice me the technical index,product weight etc,the more information the better..... |