Loading Port:Qingdao
Payment Terms:TT or L/C
Min Order Qty:20000 m²
Supply Capability:2500000 m²/month
1. Introduction of Polyester Continuous Filament Nonwoven Geotextile:
Good flexibility, permeability, filtration, separation and easy for construction.
2. Application of Polyester Continuous Filament Nonwoven Geotextile:
Geotextile has excellent permeability, acquired, durability, which can be widely used in railway, highway, movement hall,
Dams, hydraulic structures, hence hole, coastal shoal, reclamation, environmental protection and other projects.
The main products are Synthetic staple fibers needle punched non woven geotextiles and slit and spilt film yarn woven geotextiles.
Filtration of soils in drainage applications by retaining soil particles while allowing for the free flow of water
Separation and stabilization in road and railway construction
Prevention of soil movement in erosion control measures
Cushioning and protection in many containment projects
3. Feature of Polyester Continuous Filament Nonwoven Geotextile:
1. Can withstand construction installation stresses
2. UV (Ultra Violet) Stabilized
3. High Chemical Resistance
4. Optimum Elongation
Produced from high quality fibers, Nonwoven Geotextiles are needle punched to form a strong fabric that retains its dimensional stability and is resistant to damage from construction stresses.
JIANYI Nonwoven Geotextiles are available in varying strengths and thicknesses to ensure appropriate material selection for your project. Below are our standard weights and sizes.
Specification of Filament Woven Geotextile:
Technical specification of short fiber needle punched non woven geotextile
No. | Item | Specification | Note | ||||||||||
100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 600 | 800 | |||
1 | Weight Variation% | -8 | -8 | -8 | -8 | -7 | -7 | -7 | -7 | -6 | -6 | -6 |
|
2 | Thickness mm≥ | 0.9 | 1.3 | 1.7 | 2.1 | 2.4 | 2.7 | 3.0 | 3.3 | 3.6 | 4.1 | 5.0 | |
3 | Width Variation % | -0.5 | |||||||||||
4 | KN/m≥ | 2.5 | 4.5 | 6.5 | 8.0 | 9.5 | 11.0 | 12.5 | 14.0 | 16.0 | 19.0 | 25.0 | MD and TD |
5 | Elongation at Break % | 25~100 | |||||||||||
6 | CBR Mullen Burst Strength KN ≥
| 0.3 | 0.6 | 0.9 | 1.2 | 1.5 | 1.8 | 2.1 | 2.4 | 2.7 | 3.2 | 4.0 |
|
7 | Sieve Size O90 mm | 0.07~0.2 |
| ||||||||||
8 | Vertical Permeability Coefficient cm/s | K×(10ˉ1~10ˉ3) | K=1.0~9.9 | ||||||||||
9 | Tear Strength KN≥ | 0.08 | 0.12 | 0.16 | 0.20 | 0.24 | 0.28 | 0.33 | 0.38 | 0.42 | 0.46 | 0.6 | MD and TD |
