Deep Well Submersible Water Pump With Good Performance

Product Description:

1. Applications:

For water supply from wells or reservoirs. 

For domestic use, for civil and industrial applications. 
For garden use and irrigation.

2. Features of deep well pumps :

1>. 100% copper wire, automatic wiring

2>. Cold-rolled silicon steel sheet, with high-speed punching

3>. 304 Stainless steel welding shaft

4>. Over-current protector imported from Taiwan

5>. C&U bearing ( best bearing of China)

6>. No leakage with the high quality Mechanical seal

3. Operating condition

1>.Water temperature is not more than 35°c

2>.The PH value of water source is 6.5-8.0

3>.Solid content in water not more than 0.01%; diameter of the bigest particle not more then 0.2mm;

4>.Water coolant system

5> Motor ratation speed 2850rpm/min. 

6>. Protective Device grade: IP68

7>.Insulation Grade: F

8>.Minimum water flow required to flow through motor:8cm/s

9>.Maximum Start count per Hour :30 times

10>. Can be installed vertically or horizontally

11>.Flat water proof cable with separate groud wire.

4. Motor Details:

1>.Rewindable motor

 2>.Single phase: 0.37-2.2 kw    220V( ±10%)-50Hz

 3>.Three Phase: 0.37 to 7.5kw  220/380V(±10%)-50Hz;  230/400V ( ±10%)- 50Hz

5. FAQ:

1> Are CNBM pumps available in DIY stores?

Yes, currently, we’re available for DIY stores all over the world.

2> Where do I have to send pumps for service?

You must send them to the CNBM PUMP Service Point or, after contacting Customer Care, to the CNBM PUMP service center in China.

3> Are your pumps acid-proofed?

To choose the right pumps for chemical applications, we do need further details on hydraulic operations as well as on the type, concentration and temperature of the liquid.