Cloth Duct Tape For Packing 35 Mesh

Product Description:

CONSTRUCTION:

Backing: polyethylene cloth (assorted colors)

Adhesive: Hot melt rubber adhesive

TYPICAL PHYSICAL PROPERTIES:

Total Thickness (adhesives + carrier): 170-190micron

Cloth mesh: 35

Initial Tack: ≥10# steel ball

Holding power: ≥2h

Adhesion (to stainless steel): ≥12N/25mm

Tensile Strength: 30N/cm

Elongation: ≥ 15%

PACKING:

Core I.D.: 3” (76mm±1)

Jumbo Roll：1.06 x 500m/1000m

Packaging：Wrapped with corrugated cardboard.

Cut Roll: roll width 3mm up

REMARKS:

1.     The data above are typical results and subject to change without notice.

2.     Tolerance: Weight and Thickness: ±10%; Width: ±3mm;

Length: Cut Roll & Log Roll ±0.3m, Jumbo Roll ±0.5%.

3.     The products should be stored at room temperature and be kept away wet and/or heat source.

4.     It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.