Loading Port:Shanghai
Payment Terms:TT OR LC
Min Order Qty:1 set
Supply Capability:4 set/month
Automatic Extrusion Blowing Machine for 5 Gallon PC Barrel
5 Gallon PC Barrel Extrusion Blowing Machine Production Line Feature:
Reasonable equipment design, compact construction, simple operation
Equipment with high degree automatic, cost less expenses
Electrical equipment, Hydraulic system, Seal parts and Lubrication system adopt the components of famous factory in the world, with low failure rate.
To achieve the best quality guarantee, no matter the appearance and internal, automatic Extrusion Blowing Machine rate of quality goods is above 99%.
5 Gallon PC Barrel Extrusion Blowing Machine Technical Characteristic:
5 Gallon PC Barrel Extrusion Blowing Machine adopt European technology, control the hydraulic system with pressure and flow double proportion. The speed of pressure can adjust nonpolarly, high stability, exchange control the electrical system with man-machine interface. Operating surface has a machinery safety configuration, two electrical safety configuration to ensure the safety of operators.
PLC+touch screen, making the operation easy. Automatic malfunction alarm with selfdiagnosis, making the malfunction clear at a glance.
Center input die head, eliminating the knit line completely and making it easy to change the material and color.
Double linear rolling motion guider in moving, opening and closing mold, making the clamping force equally distributed, so the cut is smoother.
Control the hydraulic system with imported proportional valve, ensuring the action steady, accurate and energy saving.
High speed and efficient plasticizing system, mixing well and ensuring the produce purity.
5 Gallon PC Barrel Extrusion Blowing Machine Parameter:
Specifications | Unit | Parameters |
Max container capacity | L | 20 |
Extruder System |
|
|
Screw Diameter | mm | 82 |
Screw L/D ratio | L/D | 30:1 |
Screw Speed | rev. / min. | 10~50 |
Plasticizing Capacity | Seconds/die. | 60 |
Number of heating zone barrel | zone | 5 |
Extruder driving Power of barrel | KW | 34 |
Max Injection quantity | L | 1.5 |
Die Head |
|
|
Max die diameter | mm | 130 |
Number of heating zone | zone | 4 |
Extruder driving power | KW | 8.7 |
Clamping Device |
|
|
Platen Size(WxH） | mm | 440 x 600 |
Platen opening stroke | mm | 330~780 |
Clamping force | KN | 210 |
Next blowing Device |
|
|
Blowing the head off and landing trip | mm | 120 |
Manual control Blowing the head off and landing trip | mm | 80 |
Manipulator |
|
|
Take pieces of travel | mm | 1000 |
Framework |
|
|
Lift travel | mm | 250 |
Hydraulic System |
|
|
Rated pressure of big pump | Mpa | 14 |
Rated flow of big pump | L/min | 180 |
Motor power of Hydraulic pumps | KW | 45 |
Parison Controlling Of Hydraulic Servo System |
|
|
Rated pressure | Mpa | 6 |
Rated Flow | L/min | 22 |
Motor power of Hydraulic pumps | KW | 4 |
Pneumatical System |
|
|
Air source pressure | Mpa | 1 |
Working pressure | Mpa | 0.8 |
Air consumption | M3 / min. | 0.6 |
Electrical Control System |
|
|
Water Supply |
|
|
Water supply pressure | Mpa | 0.3 |
Power Supply | ||
Voltage | V | AC380V±10% |
Frequency | HZ | 50 |
Wire |
| 3Phase |
Total of rated power | KW | 91.7 |
Average power consumption | KW.h | 45 |
Total weight | Ton | 11 |
Dimension of machine （Lx W x H） | m | 5.3×2.7×4.5 |
5 Gallon PC Barrel Extrusion Blowing Machine Parts Picture:
5 Gallon PC Barrel Extrusion Blowing Machine Drawing Picture:
5 Gallon PC Barrel Extrusion Blowing Machine Electrical Parts Photo:
5 Gallon PC Barrel Extrusion Blowing Machine Products Photo:
