Aluminum Strip and Tape and Coil and Roll

Product Description:

1.Description

Aluminium foils thicker than 25 µm (1 mil) are impermeable to oxygen and water. Foils thinner than this become slightly permeable due to minute pinholes caused by the production process.

Aluminium foil has a shiny side and a matte side. The shiny side is produced when the aluminium is rolled during the final pass. It is difficult to produce rollers with a gap fine enough to cope with the foil gauge, therefore, for the final pass, two sheets are rolled at the same time, doubling the thickness of the gauge at entry to the rollers. When the sheets are later separated, the inside surface is dull, and the outside surface is shiny. This difference in the finish has led to the perception that favouring a side has an effect when cooking. While many believe that the different properties keep heat out when wrapped with the shiny finish facing out, and keep heat in with the shiny finish facing inwards, the actual difference is imperceptible without instrumentation. Foil may have a non-stick coating on only one side The reflectivity of bright aluminium foil is 88% while dull embossed foil is about 80%.

2.Specification

ALUMINIUM STRIP

ALLOY: AA1*** (AA1050，AA1060，AA1070，AA1100 etc.)

       AA3*** (AA3003，AA3004，AA3005，AA3105 etc.)

       AA5*** (AA5052，AA5083，AA5754 etc)

       AA8*** (AA8011，AA8006 etc)

TEMPER: H14,H16,H18,H22,H24,H26,H32,O/F

THICKNESS: 0.2mm-100mm

WIDTH: 30mm-1700mm

STANDARD: GB/T 3880-2006

Special specification is available on customer's requirement

3.Why you can choose us?

Because we can promise the better quality and price!

4.Pictures

5.FAQ

1)How about our payment term?

LC and TT and other.

2)Which country can we supply?

All around the world!