Loading Port:China Main Port
Payment Terms:TT or L/C
Min Order Qty:USD3000.00 roll
Supply Capability:2 Weeks/1*20'FCL roll/month
Quick Details Of Aluminum Foil Tape T-S5001FR For Industry:
| Name | Aluminum Foil Tape T-S5001FR For Industry |
| Description | Flame Retardant Alum Foil Tape |
| Size | 50mm x 50m,1.2m x 800m |
| Lead Time | 2weeks/1*20'FCL |
| MinOrder | 1pallet |
| Package | Wrapped by shrinkage film, then carton box |
PRODUCT DESCRIPTION Of Aluminum Foil Tape T-S5001FR For Industry:
A 50 micron (2.0 mil) high tensile strength aluminum foil backing, combined with a high performance flame-retardant solvent acrylic adhesive, protected by an easy-release silicone release paper.
FEATURES Of Aluminum Foil Tape T-S5001FR For Industry:
• Aluminum backing provides excellent reflection of both heat and light.
• High quality adhesive with super strong adhesion and holding power offers reliable and durable Foil-Scrim-Kraft Facing joints and seams sealing in HVAC ductwork application,
• Low moisture vapor transmission rate makes T-S5001FR an excellent vapor barrier.
PRODUCT FORM & SIZE AVAILABLE Of Aluminum Foil Tape T-S5001FR For Industry:
Cut Roll: 48 / 50mm (2") / 60 / 63mm (2.5") / 72 / 75mm (3") / 96mm / 100mm (4").
Log Roll: 1200mm x 45 / 50m Jumbo Roll: 1200mm x 1350m
HVAC industry for joining and sealing Foil-Scrim-Kraft Facing laminated fiberglass blanket / duct board joints and seams; joining and sealing flexible air duct seams and connections. May also be used for other industrial uses requiring a tape with these characteristics and benefits.
STORAGE & SHELF LIFE Of Aluminum Foil Tape T-S5001FR For Industry:
One year when stored at 21℃ (70℉)/50% relative humidity out of direct sunlight.
SURFACE PREPARATION Of Aluminum Foil Tape T-S5001FR For Industry:
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, free of grease, oil or other contaminants.
PRODUCT USE Of Aluminum Foil Tape T-S5001FR For Industry:
It is essential that the user evaluate the product to determine whether it is fit for a particular purpose and user’s method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on product between+10℃ ~ +40°C (+50℉ ~ +105℉)
