Adhesive Aluminum Foil Tape T-S7501P for Industry

Product Description:

 Quick Details Of Aluminum Foil Tape T-S7501P For Industry:

PRODUCT DESCRIPTION Of Aluminum Foil Tape T-S7501P For Industry:

A 75 micron (3.0 mil) high tensile strength aluminum foil backing, combined with a high performance solvent acrylic adhesive, protected by an easy-release silicone release paper.

FEATURES Of Aluminum Foil Tape T-S7501P For Industry:

• Aluminum backing provides excellent reflection of both heat and light.

• High quality adhesive with super strong adhesion and holding power offers reliable and durable Foil-Scrim-Kraft Facing joints and seams sealing in HVAC ductwork application,

• Low moisture vapor transmission rate makes T-S7501P an excellent vapor barrier.

• Service Temperature range from -20℃～+150℃ （-4℉～+302℉）

TYPICAL PHYSICAL PROPERTIES Of Aluminum Foil Tape T-S7501P For Industry:

Peel Adhesion to backing: 20N/25mm (PSTC-1)

Rolling Tack (11mm ball): ≤20 cm (PSTC-6)

Holding Power 2,000+ Min. (PSTC-7)

Service Temperature ranger: -40°C +150°C

PRODUCT FORM & SIZE AVAILABLE Of Aluminum Foil Tape T-S7501P For Industry:

Cut Roll: 48 / 50mm (2") / 60 / 63mm (2.5") / 72 / 75mm (3") / 96mm / 100mm (4").

Log Roll: 1200mm x 45 / 50m Jumbo Roll: 1200mm x 1350m

HVAC industry for joining and sealing Foil-Scrim-Kraft Facing laminated fiberglass blanket / duct board joints and seams; joining and sealing flexible air duct seams and connections. May also be used for other industrial uses requiring a tape with these characteristics and benefits.

STORAGE & SHELF LIFE Of Aluminum Foil Tape T-S7501P For Industry:

One year when stored at 21℃ (70℉)/50% relative humidity out of direct sunlight.

SURFACE PREPARATION Of Aluminum Foil Tape T-S7501P For Industry:

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, free of grease, oil or other contaminants.

PRODUCT USE: It is essential that the user evaluate the product to determine whether it is fit for a particular purpose and user’s method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on product between+10℃ ~ +40°C (+50℉ ~ +105℉)

Remarks Of Aluminum Foil Tape T-S7501P For Industry:

1.         The data above are typical results and subject to change without notice.

2.         Tolerance: Weight and Thickness: ±10%; Width: ±3mm; Length: Cut Roll & Log Roll ±0.3m, Jumbo Roll ±0.5%.

3.         The products should be stored at room temperature and be kept away wet and/or heat source.

4.         It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.

5.         The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.