Loading Port:China Main Port
Payment Terms:TT or L/C
Min Order Qty:3000M2 roll
Supply Capability:2 Weeks For 1*20'FCL roll/month
CONSTRUCTION Of Aluminum Foil Tape T-S3001WL For Industry:
Silicone Release Coating / Foil: 30 micron / Adhesive: solvent-based acrylic adhesive/no liner
FEATURES Of Aluminum Foil Tape T-S3001WL For Industry:
• Easy Application; Good tack and peel adhesion.
• Good Temperature and Aging Resistance
TYPICAL PHYSICAL PROPERTIES Of Aluminum Foil Tape T-S3001WL For Industry:
Peel Adhesion: ≥15N/25mm (GB/T2792-1995)
Rolling Tack (14mm ball): ≤10 cm (GB/T4852-1984)
Holding Power(1000g/24h): ≤2mm (GB/T4852-1998)
Service Temperature ranger: +20 ~ +120°C
ROLL SIZE Of Aluminum Foil Tape T-S3001WL For Industry:
Width: 48mm, 50mm (2"), 60mm.
Length: 50m, 100m Core: 3”(76mm±1)
Based on order, special sizes and log rolls are also available.
Application Of Aluminum Foil Tape T-S3001WL For Industry:
1. The products should be stored at room temperature and kept from wet and keep away heat source.
2. The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.
HVAC industry for joining and sealing Foil-Scrim-Kraft Facing laminated fiberglass blanket / duct board joints and seams; joining and sealing flexible air duct seams and connections. May also be used for other industrial uses requiring a tape with these characteristics and benefits.
Remarks Of Aluminum Foil Tape T-S3001WL For Industry:
1. The data above are typical results and subject to change without notice.
2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm; Length: Cut Roll & Log Roll ±0.3m, Jumbo Roll ±0.5%.
3. The products should be stored at room temperature and be kept away wet and/or heat source.
4. It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.
5. The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.
