Aluminum Coil Jumbo Roll Mill Finished Coil

Product Description:

1.Description

Aluminium foil (or aluminum foil) is aluminium prepared in thin metal leaves with a thickness less than 0.2 millimetres (8 mils); thinner gauges down to 6 micrometres (0.24 mils) are also commonly used.In the United States, foils are commonly gauged in thousandths of an inch or mils. Standard household foil is typically 0.016 mm (0.63 mils) thick, and heavy duty household foil is typically 0.024 mm (0.94 mils). Thefoil is pliable, and can be readily bent or wrapped around objects. Thin foils are fragile and are sometimeslaminated to other materials such as plastics or paper to make them more useful. Aluminium foil supplantedtin foil in the mid 20th century.

Annual production of aluminium foil was approximately 800,000 tonnes (880,000 tons) in Europe and 600,000 tonnes (660,000 tons) in the U.S. in 2003. Approximately 75% of aluminium foil is used for packaging offoods, cosmetics, and chemical products, and 25% used for industrial applications (e.g. thermal insulation, cables and electronics).

In North America, aluminium foil is known as aluminum foil. It was popularized by Reynolds Metals, the leading manufacturer in North America. In the United Kingdom and United States it is, informally, widely called tin foil, for historical reasons (similar to how aluminum cans are often still called "tin cans").Metallised films are sometimes mistaken for aluminium foil, but are actually polymer films coated with a thin layer of aluminium. In Australia, aluminium foil is widely called alfoil.

2.Why you must choose us?

Our quality is the best!

3.Specification and application

ALUMINIUM COIL

ALLOY: AA1***

       AA3***

       AA5***

TEMPER: H14 H16 H18 H22 H24 H26 H32 O/F

THICKNESS:0.03MM-3.0MM

WIDTH: 30MM-1700MM

COATING: PE(POLYESTER),PVDF,EPOXY

STANDARD: GB/T 17748-1999

Special specification is available on customer's requirement

SURFACE QUALITY: GOOD APPEARANCE WITH NO-CRACK AND WELL-DISTRIBUTE GRAIN.

BUILD UP: TIGHT SLIT EDGES FREE FROM CRACKS, LAYER TO LAYER SHIFT NOT MORE THAN 2MM.

PROFILE: -0/+1%

FLATNESS: MILL FLATNESS COIL HAVING EDGE WAVINESS RATHER THAN CENTER BUCKLES SHALL BE ACCEPTABLE.

ROLLING PERFORMANCE: RE-ROLLABLE TO THE FINAL DESIRES GAUGES

5.FAQ:

1)What's kind of payment term we can supply?

CIF,CFR, FOB and other.

2)Can we supply samples?

Yes, we can!

3)What can you do if you have other quastions?

You can contact us freely at any time!