Loading Port:Shanghai
Payment Terms:TT OR LC
Min Order Qty:6 m.t.
Supply Capability:25000 m.t./month
316 stainless steel pipe
Product Description
Nominal Diameter(mm) | Outside Diameter(mm) | Nominal Wall Thickness (mm) | |||
N.B | NPS | SCH5S | SCH10S | SCH40S | |
8 | 1/4″ | 13.72 | 1.65 | 2.24 | |
10 | 3/8″ | 17.15 | 1.65 | 2.31 | |
15 | 1/2″ | 21.34 | 1.65 | 2.11 | 2.77 |
20 | 3/4″ | 26.67 | 1.65 | 2.11 | 2.87 |
25 | 1″ | 33.4 | 1.65 | 2.77 | 3.38 |
32 | 1-1/4″ | 42.16 | 1.65 | 2.77 | 3.56 |
40 | 1-1/2″ | 48.26 | 1.65 | 2.77 | 3.68 |
50 | 2″ | 60.33 | 1.65 | 2.77 | 3.91 |
65 | 2-1/2″ | 73.03 | 2.11 | 3.05 | 5.16 |
80 | 3″ | 88.9 | 2.11 | 3.05 | 5.49 |
90 | 3-1/2″ | 101.6 | 2.11 | 3.05 | 5.74 |
100 | 4″ | 114.3 | 2.11 | 3.05 | 6.02 |
125 | 5″ | 141.3 | 2.77 | 3.4 | 6.55 |
150 | 6″ | 168.28 | 2.77 | 3.4 | 7.11 |
200 | 8″ | 219.08 | 2.77 | 3.76 | 8.18 |
Tolerance :
Standard | GB151 ASTM JIS DIN | ||
OD | I | II | |
<Ø25---≥Ø50 | ±0.18 | ±0.30 | |
≥Ø25---≤Ø89 | ±0.30 | ±0.45 | |
≥Ø89---≤Ø129 | ±0.51 | ±0.80 | |
Thickness | All specifications±0.5% | ||
Length | All specifications±6 | ||
Straightness | All specifications≤2/1000 | ||
Chemical Composition:
Grade and Main chemical composition% | |||||||||
C | Si | Mn | P≤ | S≤ | Cr | Mo | Ni | Other | |
201 | ≤0.15 | ≤1.00 | 5.5-7.5 | 0.06 | 0.03 | 16-18 | - | 3.5-5.5 | N≤0.25 |
202 | ≤0.15 | ≤1.00 | 7.5-10.0 | 0.06 | 0.03 | 17-19 | - | 4.0-6.0 | N≤0.25 |
301 | ≤0.15 | ≤1.00 | ≤2.00 | 0.045 | 0.03 | 16-18 | - | 6.0-8.0 | - |
302 | ≤0.15 | ≤1.00 | ≤2.00 | 0.045 | 0.03 | 17-19 | - | 8-10.0 | - |
303 | ≤0.15 | ≤1.00 | ≤2.00 | 0.2 | ≥0.015 | 17-19 | ≤0.6 | 8.0-10.0 | - |
304 | ≤0.08 | ≤1.00 | ≤2.00 | 0.045 | 0.03 | 18-20 | - | 8-10.5 | - |
304L | ≤0.03 | ≤1.00 | ≤2.00 | 0.045 | 0.03 | 18-20 | - | 9-13 | - |
305 | ≤0.12 | ≤1.00 | ≤2.00 | 0.045 | 0.03 | 17-19 | - | 10.5-13 | - |
309S | ≤0.08 | ≤1.00 | ≤2.00 | 0.045 | 0.03 | 22-24 | - | 12-15 | - |
310S | ≤0.08 | ≤1.5 | ≤2.00 | 0.045 | 0.03 | 24-26 | - | 19-22 | - |
316 | ≤0.08 | ≤1.00 | ≤2.00 | 0.045 | 0.03 | 16-18 | 2-3 | 10-14 | - |
316L | ≤0.03 | ≤1.00 | ≤2.00 | 0.045 | 0.03 | 16-18 | 2-3 | 12-15 | - |
317 | ≤0.08 | ≤1.00 | ≤2.00 | 0.045 | 0.03 | 18-20 | 3-4 | 11-15 | - |
317L | ≤0.03 | ≤1.00 | ≤2.00 | 0.045 | 0.03 | 18-20 | 3-4 | 11-15 | - |
321 | ≤0.08 | ≤1.00 | ≤2.00 | 0.045 | 0.03 | 17-19 | - | 9-13 | Ti≥5×C |
405 | ≤0.08 | ≤1.00 | ≤1.00 | 0.04 | 0.03 | 11.5-14.5 | - | ≤0.6 | AL0.1-0.3 |
420F | 0.26-0.4 | ≤1.00 | ≤1.25 | 0.06 | ≥0.15 | 12-14 | ≤0.6 | ≤0.6 | - |
430 | ≤0.12 | ≤0.75 | ≤1.00 | 0.04 | 0.03 | 16-18 | - | ≤0.6 | |
Definition of stainless steel(Adopted form Wikipedia)
In metallurgy, stainless steel, also known as inox steel or inox from French "inoxydable",
is defined as a steelalloy with a minimum of 10.5% to 11% chromium content by mass.
Stainless steel does not readily corrode, rust or stain with water as ordinary steel does,
but despite the name it is not fully stain-proof, most notably under low oxygen, high salinity,
or poor circulation environments. It is also called corrosion-resistant steel or CRES
when the alloy type and grade are not detailed, particularly in the aviation industry.
There are different grades and surface finishes of stainless steel to suit the environment
the alloy must endure. Stainless steel is used where both the properties of steel
and resistance to corrosion are required.
Surface Finish :
Surface finish | Characteristics and application |
No.2B | The surface brightness and flatness of no2B is better than no2D. then through a special surface treatment to improve its mechanical properties, No2B could nearly satisfy comprehensive uses. |
No.3 | Polished with abrasive belt of git#100-#200, have better brightness with discontinuous coarse stria, used as inner and external ornaments for building, electrical appliances and kitchen utensils etc. |
No.4 | Polished with abrasive belt of grit #150-#180,have better brightness with discontinuous coarse stria, but thinner than No3, are used as bathtub buildings inner and external ornaments electrical appliances kitchen utensils and food processing equipment etc. |
HL | Polished with abrasive belt of grit #150-#320 on the NO.4 finish and has continuous streaks, mainly used as buildings ornaments elevators, door of building, frontal plate etc. |
BA | Cold rolled, bright annealed and skin-passed, the product have excellent brightness and good reflexivity like mirror, kitchen apparatus, ornament etc. |
8K | The product have excellent brightness and prefer reflexivity can to be the mirror. |
