S Single-stage double-suction centrifugal pumps

Product Description:

Type (SM\SF\SL) is the new saving product of replacing the old, it's high efficiency, smooth operation, safe and reliable. The pump designed by the national standard and take the new materials, construction so as to transfer lots kinds of liquids.

Type S is used to transfer clean water or similar liquids in physical and chemical properties; Type SM is used to transfer liquids with sands; Type SF is used to transfer.

Kinds of corrosive liquids. Type SY is used to transfer oil; Type S(SM\SF\SL\SY)
Said suitable for factory, mine, city, power plant, irrigation and so on, the temperature Range from 20'C-180'C.
Performance range: Capacity: 50~15000cube per meter
Head: 8.6_140m

All the pump can be designed to the data and construction
Following the requirements of customers.
Construction: Type S (SM\SF\SY)pump is horizontally installed, the inlet and the outlet are under the shaft. The casing and cover of the pump are divided along the axis. It is unnecessary to disturb inlet piping and outlet piping while maintenance.

Bearings: The two ends of pump are rolling bearings to support the rotor, the lubricated oil is grease, as the dia. Of outlet bellow 700mm, which get lubricated with oil.

Shaft seal way:
1)Soft packing seal
2)Mechanical seal(the outlet dia. Is bellow 800mm). Type SL is vertically installed, the inlet and outlet are under the shaft. View from the motor, the rotation of the pump rotor is clockwise.
3)According to requirements of customers, the rotation can be changed into counter clockwise.

Materials of tolerance parts: Type S: Cast iron
Type SM SY: Anti-friction cast iron, cast steel, and stainless steel.
Type SF: NiCr cast iron, stainless steel
The description of pump type
For example: 500S(SM\SF\SL\SY)35A
500_inlet diameter ( mm ).
S_Single-stage double-suction centrifugal pump with horizontal split casing.