Loading Port:China Main Port
Payment Terms:TT OR LC
Min Order Qty:-
Supply Capability:-
PARAMETERS
| 1 | Main frame | 350H steel |
| 2 | Thickness of medium plate | 14mm |
| 3 | Number of rollers | 13 |
| 4 | Diameter of shaft | 70mm |
| 5 | Shape of chain | 6' |
| 6 | Material of shaft | 45$ steel |
| 7 | Motor power | 3kw |
| 8 | Dimension | 5800mm*1500mm*1400mm |
| 9 | Weight | 3500kg |
| 10 | Material of blade | Cr12 |
| 11 | Control system | PLC, frequency converter, encoder |
Corrugated Metal roofing machine Product Feature:
The metal roofing sheet produced by roll forming machine look beautiful, elegant and noble. They are widely used for garden, factory, hotel, exhibition center and villa, etc.
Corrugated Metal roofing machine Components:
Roll forming machine consists of Uncoiler, Coil sheet guiding device, Main roll forming system, Post cutting device, Hydraulic station, PLC control system and Support table.
Optional with Hydraulic Decoiler, Auto Stacker, Safe Cover, Pre-Cutting, Film Covering Device, and so on.
Corrugated Metal roofing machine Working Flow:
Decoiling→Feeding & Guiding→Pre-Cutting(If needed)→Roll Forming→Post Cutting→Finished Products To Support Table
Corrugated metal roofing machine General Technical Specs
| No | Item | Parameter | Note | |
| 1 |
Suitable Material
| Type | Metal Sheet | Customized Specs Acceptable |
| Customized Profile | ||||
| Thickness | 0.3-0.7mm | |||
| Yield Strength | 235MPA | |||
| 2 | Product Specs | Cover width | Customized Profile | |
| Length | Any length | |||
3 | Power Specs | Type | 380V/3PH/50HZ | Up to Practical Profile |
| Main Motor | 3-48KW | |||
| Hydraulic | 2.2-11KW | |||
| 4 | Machine Specs | Transmission | Chain and Sprocket | Gearbox and Cardan Acceptable |
| Structure | Column Block Or Wall Plate | |||
| Shafter | No.45 steel tempered | |||
| Rollers | No.45 steel chrome coated | Cr12 or other acceptable | ||
| Cutting Blade | Cr12 quenched | |||
| 5 | Working Capacity | Forming Speed | 15-20m/min for standard solution | Higher Speed Solution Available |
| Working Speed | Up to Length-set Cutting | |||
| 6 | Hydraulic Cantilever Decoiler (Optional) | Type | Hydraulic | |
| Max. Capacity | 5 T/10T/15T | |||
| Suitable coil OD | 1200mm | |||
| Suitable coil ID | 508/610mm | |||
| Max Coil width | 1250mm | |||
| 7 | Forming Stand | 8-48 | Up to Practical Profile | |
| 8 | Forming Shaft Diameter | 55-120mm | Up to Practical Profile | |
| 9 | Type of Cutting | Length-set cutting after roll formed | Pre-cutting acceptable | |
| 10 | Control System | Mitsubishi PLC and Inverter | ||
| 11 | Output Supporter | 2 Pcs Simple Supporter | Auto Stacker Optional | |
