WQD Seires Submersible Sewage Pump for Dirty Water

Product Description:

WQD Series Sewage Submersible Pump

Application and Installation of WQD Seires Submersible Sewage Pump for Dirty Water

This pump is widely applied in many fields, such as industry, agriculture, mine, building construction, environment protection, etc. Liquids that contain mud, sand, short fiber, paper scrap and other solid particles as well as soft solids are applicable, for example, mud water, grey water, sewage, excrement, domestic wastewater, etc. Based on these, this pump is the ideal equipment for construction site, desilting of pool as well as irrigation and drainage in agriculture. In addition, this product is not suitable for condition that requires anti-explosion.

Operating Limits of WQD Seires Submersible Sewage Pump for Dirty Water

1. Trans medium's PH: 4-10

2. Fluid temperature limit:<40 °C
3. Max density of medium: 1.2x103kg/m3
4. Operating depth: 5m

Materials of WQD Seires Submersible Sewage Pump for Dirty Water

Motor housing: Cast iron
Impeller: Cast iron
Motor wire: Copper or Aluminum
Mechanical seal: Ceramic - Graphite
Shaft: CS 45# or SS

Motor specs of WQD Seires Submersible Sewage Pump for Dirty Water

2-pole induction motor
Insulation Class: E
Protection: IPX8
Single-phase with capacitor and thermal overload protection

FAQ

Q: Are CNBM pumps available in DIY stores?

A: Yes, currently, we’re available for DIY stores all over the world.

Q: Where do I have to send pumps for service?

A: You must send them to the CNBM PUMP Service Point or, after contacting Customer Care, to the CNBM PUMP service center in China.

Q: Are your pumps acid-proofed?

A: To choose the right pumps for chemical applications, we do need further details on hydraulic operations as well as on the type, concentration and temperature of the liquid.

Q: Can your pumps mount Eff.1 motors

A: Currently, only on request though this will shortly be a CNBM standard.

Q: Are your pumps protected against dry running?

A: No, unprotected centrifugal pumps are not generally designed for dry running. It is important to give us or your dealer as much information as possible about the system in which the pump is used. Inlet pressure, the type of liquid to be pumped, together with relative density, viscosity and temperature, for example, are required in order to allow CNBM to recommend the right pump with the right gaskets for a long operating lifetime.