Loading Port:China Main Port
Payment Terms:TT or L/C
Min Order Qty:10000M2 m²
Supply Capability:20000M2 Per Day m²/month
1. Specification of Woven Film
Aluminum foil: Metallizedpolyester: 12u / Polyethylene / Polyethylene Woven Fabric/Aluminum foil: 7u
TYPICAL PHYSICAL PROPERTIES:
|
PROPERTIES |
UNIT |
VALUE |
TEST METHOD | ||||
|
Basic weight |
gsm |
140 |
ASTM D646 | ||||
|
Tensile strength: M. D. X. D. |
N/25mm |
450 450 |
ASTM C1136 | ||||
|
Burst strength |
N |
150 |
ASTM D774 | ||||
|
Reflectivity of foil surface |
% |
95 |
---------- | ||||
|
Temp. Resistance |
-29°C +66°C |
No change keep soft |
ASTM C1263 | ||||
|
Water vapor permeance |
ng/N.s |
1.6 |
ASTM E-96 | ||||
|
Water Soak Test |
24hrs |
No delamination |
---------- |
Width: 1.2m, 1.25m, 1.3m
Length: 60m, 100m, 120m
Core I.D.: 3"(76mm ±1)
Based on order, special sizes are also available.
Remarks:
(1).The data above are typical results and subject to change without notice.
(2).Tolerance: Weight and Thickness: ±10%; Width: ±3mm; Length: Cut Roll & Log Roll ±0.3m, Jumbo Roll ±0.5%.
(3).The products should be stored at room temperature and kept from wet and heat source.
(4).It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.
(5).The user should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for user’s special purpose and technique.
2. Application of Woven Film
Foil facing is mainly used for duct wrap in HVAC sustem and other fields, such as vapor barrier etc., and suitable for off-line lamination of glass wool or rock wool. By special processing, the facing will have excellent flame retardant property.
3. Packaging & Delivery of Woven Film
Depends on the clients' requirements and the production conditions.
