Loading Port:Tianjin Port
Payment Terms:TT or L/C
Min Order Qty:50MT m.t.
Supply Capability:based on order m.t./month
1. Specification of Hollow Section-Square Tubes
1) Application: Widely used in building, machine, chemical equipment, automobile industrial, container, and also applied to agriculture and mine machine.
2)Standard：ASTM A500, GB6728
3)Steel grade: ASTM A500: A, B, C; GB6728：Q195，Q215，Q235，Q345
4)Delivery Time: 7-20 Days after receving prepayment or L/C
2. Size of Hollow Section-Square Tubes
|
SIZE(mm) |
THICKNESS(mm) |
|
10×10 |
0.6-1.0 |
|
12×12 |
0.6-1.0 |
|
16×16 |
0.6-1.2 |
|
19×19 |
0.6-1.5 |
|
20×20 |
1.6-1.5 |
|
25×25 |
1.0-2.75 |
|
30×30 |
1.0-2.75 |
|
32×32 |
1.0-3.0 |
|
38×38 |
1.0-3.0 |
|
40×40 |
1.0-3.5 |
|
50×50 |
1.0-5.0 |
|
60×60 |
1.0-6.0 |
|
63.5×63.5 |
1.0-6.0 |
|
70×70 |
1.5-6.0 |
|
75×75 |
1.5-6.0 |
|
80×80 |
2.0-6.0 |
|
90×90 |
2.0-6.0 |
|
100×100 |
2.3-6.0 |
|
120×120 |
4.0-6.0 |
|
125×125 |
4.0-6.0 |
|
150×150 |
4.0-8.0 |
|
200×200 |
6.0-12 |
|
250×250 |
6.0-12 |
|
300×300 |
6.0-12 |
|
400×400 |
6.0-12 |
*Remark: Besides below sizes, we also can arrange production based on requirement of customer's requirement
3. Packing&Delivery
Packing Details: Big OD: in bulk; Small OD: packed by steel pipe;Plastic bags 4 or According to customer's requirement
Delivery Time: 20-30 days upon receving prepayment or L/C
4. Data Sheet
ASTM A 500
|
Chemical Requirement | |||||
|
Composition % | |||||
|
Grade A |
Grade B | ||||
|
Element |
Heat analysis |
Product analysis |
Heat analysis |
Product analysis | |
|
Carbon max |
0.26 |
0.3 |
0.22 |
0.26 | |
|
Manganese max |
… |
… |
1.4 |
1.45 | |
|
Phosphorus, max |
0.035 |
0.045 |
0.03 |
0.04 | |
|
Sulfur max |
0.035 |
0.045 |
0.02 |
0.03 | |
|
Copper, when copper steel is specified, min |
0.20 |
0.18 |
0.2 |
0.18 | |
|
Where an ellipsis (...)appears in this table, there is no requirement | |||||
|
For each reduction of 0.01 percentage point below the specified maximum for carton, and increase of 0.06 percentage point above the specified maximum for manganese is permitted, up to a maximum of 1.50% by heat analysis and 1.6% by product analysis | |||||
|
Tensile Requirement | ||
|
|
Grade A |
Grade B |
|
Tensile strength, min, psi (Mpa) |
48000 (400) |
70000 (483) |
|
Yield strength, min, psi (Mpa) |
36000 (250) |
50000 (345) |
|
Elongation in 2 in. (50.8mm), min, % |
23 |
23 |
5. Products Showroom
