Switch Power Supply 12V 15 Watt for LEDs

Specification

HS-15-5

HS-15-12

HS-15-24

DC output voltage

5V

12V

24V

Output voltage tolerance(Note:2)

±2%

±1%

±1%

Rated output current

3A

1.3A

0.7A

Output current rage

0-3A

0-1.3A

0-0.7A

Wave and noise(Note :3)

50mVp-p

50mVp-p

100mVp-p

Inlet stability(Note :4)

±0.5%

±0.5%

±0.5%

Load stablity (Note :5)

±1%

±0.5%

±0.5%

Efficiency

76%

78%

80%

Adjustable range for DC voltage

+10,5%

+10%

+10%

AC input voltage range

170-264VAC 47-63Hz;240-370VDC

Input current

0.25A/230A

AC INnrush current

Cold-start current 30A/230V

Leakage current

<0.5mA/240VAC

Overload protection

105%-135% hiccup mode,auto recovery

Temperature coefficient

±0.02%/°C(0-50°C)

Setup rise hold up time

200ms,100ms,30ms

Vibration

10-500HZ,2G 10min,/1cycle,Period for60min,Each axes

Withstand voltage

Input and output internal:1.5KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC

Isolation resistance

Input and output internal:Input and enclosure,Output and enclosure:500VDC/100MΩ

Working temperature and humidity

-10°c~+60°c(Refer to output derating curve),20%~90%RH

Store temperature and humidity

-20°c~+85°c 10%~95%RH

Overall dimension

84×58×38mm

Weight/Packing

0.15Kg, 80pc/CTN

Note:

1.The testing condition for the parameter above is:230VAC input,rated load,25°C70% RH.Humidity.

2.Tolerance include the setting tolerance,line stability and load stability.(Note:5).

3.Wave test:adopting "A12"double wire for 20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting.

4.Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage.

5.Load stability test:the load is from 0% to 100%.