Loading Port:Qingdao
Payment Terms:TT OR LC
Min Order Qty:1 kg
Supply Capability:3000 kg/month
1.Size:125*166*220mm
2.V/F control, Vector control
3.3.7kw variable frequency drive
4.Best price
5.Quick Delivery
SVF-M mini vector variable frequency drive for water pump
Technical Specification
Control Characteristics | Control Mode | SPWM (Sinusoidal Pulse Width Modulation) control (V/F sensorless vector control) | ||
Freq. Setting Resolution | 0.1Hz | |||
Output Freq. Resolution | 0.1Hz | |||
Torque Characteristics | Including the auto-torque, auto-slip compensation, starting torque can be 150% at 5.0Hz | |||
Overload Endurance | 150% of rated current for 1 minute | |||
Skip Frequency | Three zones, settings range 0.1~400Hz | |||
Acc/Dec Time | 0.1~600s (Independent settings) | |||
V/F Curve | Arbitrary V/F curve setting | |||
Stall Prevention Threshold Frequency Setting | 20~200%, Setting of Rated Current | |||
DC Injection Braking | Operation frequency 0.01~60Hz, output 0~100% rated current, start time 0~5s, stop time 0~25s | |||
Braking Torque | Approx. 20% (up to 125% possible with option brake resistor or brake unit externally mounted) | |||
Operating Characteristics | Frequency Setting | |||
External Signal | Potentiometer 5kΩ/0.5W 0~+10VDC, 4~20mA, interface RS485; Multi-function Inputs (7 steps, Jog, Up/Down) | |||
Operation Setting Signal | Keypad | Set by RUN, STOP | ||
External Signal | S0~S5 can be combined to offer various modes of operation, RS485 serial interface (MODBUS) | |||
Multi-function input signal | Multi-step selection 0 to 7, Acc/Dec inhibit, two Acc/Dec switches, External Counter, Jog, PLC operation, External Base Block, auxiliary motor protection, auxiliary motor control is invalid, drive reset, UP/DOWN key settings | |||
Multi-function output signal | AC drive operating, frequency attained, zero speed, PLC operation, counter attained, over torque, base block, operation mode, fault indication, drive is ready, overheat alarm, emergency stop | |||
Analog output signal | Indicate output frequency, current, voltage, frequency command, speed, power factor output signal | |||
Alarm Output Contact | Drive is fault, the contact will be ON (One form C contact or 3 open collector outputs) | |||
Operation Functions | AVR, over-voltage, over-current stall prevention, 3 fault records, reverse inhibition, momentary power loss restart, DC injection braking, auto torque compensation, slip compensation, S-curve, auto tuning, adjustable carrier frequency, frequency limits, parameters reset, vector control, PID feedback control, external counter, PLC, MODBUS communication, abnormal reset, abnormal restart, digital frequency output, sleep/revival function, 1st/2nd frequency source selections | |||
Protection Functions | Over voltage, over current, under voltage, external fault, overload, contact protection, overheating, electronic thermal, ground fault | |||
Display Keypads | 6-key, 4-digit, 7-segment LED, 4 status LED, master frequency, output frequency, output current, custom units, parameter values for setup, review and faults, RUN, STOP, RESET, FWD/REV | |||
Built-in brake chopper | Built-in for all models | |||
Environment Condition | Protection threshold | IP20 | ||
Pollution Degree | 2 | |||
Installation location | Altitude 1000m or lower, keep from corrosive gasses, liquid and dust | |||
Ambient temperature | -10°C~50°C non-condensing and not frozen (-10°C~40°C for above 5.5KW) | |||
Storage/Transportation temperature | -20°C~60°C | |||
Ambient humidity | Below 90%RH (non-condensing) | |||
Vibration | 9.80665m2(1G) less than 20Hz; 5.88m/s2(0.6G) at 20 to 50Hz | |||
Approvals | ||||
Technical Features
1. Adopts 16 bit microprocessor, sine wave PWM control
2.Automatic torque ascension and automatic sliding compensation function
3.Output frequency 0.1-400 Hz
4.8 period of speed setting and 7 period can be running the program
5.Low noise, carrier frequency can from 1 kHz-15 kHz adjustment
6.Two paragraphs Acceleration and deceleration time and two segments of the curve slow
and deceleration
7.Simulation frequency set acceptable 0-10 VDC, 4-20 mA
8.The built-in serial communication interface RS-485 (baud rate can reach 38400)
9.Save energy running and automatic voltage stabilizing section function (AVR)
10.Adjustable V/F curve Acceleration and automatic and deceleration function
11.Simple vector control and built-in PID control, and the simple positioning function
12.Sleep/wake up function and zero velocity keep function
Technical Parameter
VFD Capacity | Input Voltage (V) | Power Capacity (KVA) | Input Current (A) | Output Current (A) | Adapter Motor(KW) |
3.7S/T2B | 3 Phase 230V | 5.9 | 19.6 | 18 | 3.7 |
Model Size
VFD Model | W1 | H1 | W | D | H | Installation Aperture | Weight (Kg) |
SVF-MN3.7S/T2B | 110.0 | 205 | 125 | 166 | 220 | 3.2 |
Accessories
Company Introduction
Shandong Chinsc Electric Technology Co., Ltd. is a manufacturer of professional inverters integrating research and development, production and sales. With advanced technologies, excellent quality, scientific management and perfect services, we are building a first-class inverter manufacturer gradually.
Currently, our company has introduced CHINSC inverter models such as SVF3000 series, SVF-M series, SVF-EV series, SVF-G7 Series 0.4 ~ 630KW, to the markets. With excellent product quality, excellent technology development capabilities and comprehensive after-sales services, CHINSC inverters have won praise among agents and customers across the country.
Factory View
Our Quality
Quality is something that makes the buyer to prefer a brand, keeping this thing in mind we make sure that the products offered by us are made in compliance with the prescribed quality norms. Efforts are made by us to enhance the quality of our range, in order to make our product worth of the money spend by the clients. Following points are kept in mind, in order to maintain quality in our range:
Entire production process is keenly visualized
Raw material is sourced from reliable vendors
Client’s queries are promptly addressed
Final range is stringently tested
Customized requirements of clients are also served efficiently
Trade terms
a. Delivery term
We will delivery for you after you done the full payment within 3 to 15 working days
b. Payment
For small order by air or by express, it is 100% T/T in advance.
For large order by ocean, 30% deposit of the order value should be paid, 70% of the balance payment should be done before delivery
c. Packing
Unless otherwise stated in the offer, the prices include packing in accordance with CHINSC’S customary standard of packing.
Welcome your inquiry!
Looking forward to cooperating with you!
