Power | 0.5kVA-10kVA(Horizontal) | 5kVA-60kVA(Vertical) |
Single phase input voltage | 70V-130V and 160V-250V | 160V-250V |
Single phase output voltage | 220V and 110V | 220V |
Accuracy of voltage stabilization | 220V±3% 110±6% |
Frequency | 50Hz/60Hz |
Adjustable time | 1s(When input voltage has a charge of 10%) |
Waveform distortion | No additional waveform distortion |
Efficiency | >90% |
Load power factor | 0.8 |
Working environment | Tenperature:-5--+40 Humidity:<90% |
Dielectric strength | 1500V/1min |
Insulation resistance | ≥2MΩ |
Three Phase Four-wire AC Voltage Regulator |
Power | 1.5kVA-60kVA |
Three Phase Input Voltage | Phase voltage 160V-250V;Wire viltage 277V-430V |
Three Phase Output Voltage | Phase voltage 220V;Wire viltage 380V |
Accuracy of voltage stabilization | 2-5% |
Frequency | 50Hz/60Hz |
Adjustable time | 1s(When input voltage has a charge of 10%) |
Waveform distortion | No additional waveform distortion |
Efficiency | >90% |
Load power factor | 0.8 |
Working environment | Tenperature:-5--+40 Humidity:<90% |
Dielectric strength | 1500V/1min |
Insulation resistance | ≥2MΩ |
Power | 0.5kVA-10kVA(Horizontal) | 5kVA-60kVA(Vertical) |
Single phase input voltage | 70V-130V and 160V-250V | 160V-250V |
Single phase output voltage | 220V and 110V | 220V |
Accuracy of voltage stabilization | 220V±3% 110±6% |
Frequency | 50Hz/60Hz |
Adjustable time | 1s(When input voltage has a charge of 10%) |
Waveform distortion | No additional waveform distortion |
Efficiency | >90% |
Load power factor | 0.8 |
Working environment | Tenperature:-5--+40 Humidity:<90% |
Dielectric strength | 1500V/1min |
Insulation resistance | ≥2MΩ |
Three Phase Four-wire AC Voltage Regulator |
Power | 1.5kVA-60kVA |
Three Phase Input Voltage | Phase voltage 160V-250V;Wire viltage 277V-430V |
Three Phase Output Voltage | Phase voltage 220V;Wire viltage 380V |
Accuracy of voltage stabilization | 2-5% |
Frequency | 50Hz/60Hz |
Adjustable time | 1s(When input voltage has a charge of 10%) |
Waveform distortion | No additional waveform distortion |
Efficiency | >90% |
Load power factor | 0.8 |
Working environment | Tenperature:-5--+40 Humidity:<90% |
Dielectric strength | 1500V/1min |
Insulation resistance | ≥2MΩ |
Application Widely used in the fields of post office,store,elevator,hospital,school,publishing house and stock exchange where normal voltage is in need,and also can be used in the factories of large and middle-scale industrial and mining corp,it is very much suitable for some important devices and supporting single machine. |
Input voltage | Three-phase four-line system phase voltage:220±20% line voltage:380±20%,or phase voltage:220±30% line voltage:380±30%(can be selected.Please specify when ordering) Single-phase:220±20% or 220±30%(can be selected.Please specify when ordering.) | Output voltage | Phase voltage:220V Single-phase:220V Line voltage:380V | Output voltage accuracy | 1-5%(can be adjusted)Frequency:50HZ/60HZ | Efficiency | ≥98%(Power grade over 50KVA) | Ambient temperature | -10~+40°C | Insulation resistance | ≥5MΩ | Electric intensity | The voltage for electrical strength and power frequency sinusoidal is 2000V without breakdown and flash over when lasts 1minute | Overload Capacity | It can last 1 minute at the rated current of two times | Wave form Distortion | No additional waveform distortion | Protective function | it offers the protections against over voltage,over current,phase shortage and phase-sequence(The single-phase offers no protection against the phase shortage and phase-sequence)and mechanical failure | Response speed | ≤1s(in the condition that the external voltage changes is 10%) |
|
