| Packaging Detail: | Carton with foam or plywood case. |
| Delivery Detail: | The delivery time depends on the quantity. |
Specifications
1.Stainless steel oil transfer gear pump
2.Small pump with a portable handle
3.Transfer oil, lube liquid
4.Widely used
WCB Stainless steel oil transfer gear pump
Product Introduction:
1. WCB Stainless steel oil transfer gear pump is a small gear oil pump with a portable handle.
2. This series of pump is always used to delivery lubricating liquid, but by adopting stainless steel material, it also works for medium that is non-lubricating oil, beverage or corrosive liquid.
3. With the merits of small volume and easy to move and carry, pump has always been used in oil drum carrier, oil refinery, electric power plant and substation and oil depot.
4. The voltage and frequency could be customized to meet customers' requirements.
Product details:
| Working Principle: | Double Gears |
| Main applications: | Oil |
| Driver: | Electric motor |
| Power Specs: | 380/415 V 3phase; 110V/220/240 V 1phase;50hz/60hz,etc |
| Max. permissible fluid temperature: | 120°C(248°F) |
| Type of connection: | Thread, Quick couple. |
| Installation position: | Horizontal |
| Casing parts material: | Cast iron, Stainless Steel |
| Shaft seal type: | Shaft seal ring |
| Free passage: | 00 mm |
| Maximum viscosity: | 300C.S.T |
| Maximum drive rating: | 1.1kW(1.5HP) |
| Maximum caliber: | 25mm(1inch) |
| Maximum discharge-side pressure: | 0.3MPa(3bar) |
| Maximum suction | 5m(16.4ft) |
| Flow rate range: | 30-100L/min(7.9-26.4US.GPM) |
Performance data:
| Model | | Caliber | Capacity | Head | Motor power | Voltage |
| | | (mm) | (L/min) | (m) | (W) | (Phase) |
| WCB-30 | Cast iron | 20 | 30 | 30 | 370 | 1ph/3ph |
| WCB-50 | | 20 | 50 | 30 | 550 | 1ph/3ph |
| WCB-75 | | 25 | 75 | 30 | 750 | 1ph/3ph |
| WCB-100 | | 25 | 100 | 30 | 1100 | 1ph/3ph |
| WCB-30P | Stainless steel | 20 | 30 | 30 | 370 | 1ph/3ph |
| WCB-50P | | 20 | 50 | 30 | 550 | 1ph/3ph |
| WCB-75P | | 25 | 75 | 30 | 750 | 1ph/3ph |
