Spunbond Polyester Mat /filament Polyester Mat For APP/SBS Waterproof Membranes

Loading Port:Shanghai

Payment Terms:TT OR LC

Min Order Qty:1000 m²

Supply Capability:200000 m²/month

Product Description:

Product description

‍

Produced by the Modern Waterproofing Company,Spunbond Polyester Mat /filament Polyester Mat For APP/SBS Waterproof Membranes is a line of polymer-modified bitumen waterproofing membrane of the highest quality.

Spunbond Polyester Mat /filament Polyester Mat For APP/SBS Waterproof Membranes is modified by SBS, thus guaranteeing high flexibility under very low temperature.

SBS Waterproofing membranes reinforced with Polyester suitable hot and cold atmospheres - Cold Flexibility -10 : -20 C

Spunbond Polyester Mat /filament Polyester Mat For APP/SBS Waterproof Membranes is reinforced with composite polyester (P) of non-woven polyester armoured with glass fiber filaments which provides highly mechanical properties and dimensional stability.

Spunbond Polyester Mat /filament Polyester Mat For APP/SBS Waterproof Membranes with Mineral Slated Finish is recommended for exposed roofing system (Unprotected) for Non-accessible roofs or roofs subject to low traffic conditions

Packaging & Shipping

Package and transportation-- SBS waterproof membrane / APP waterproof membrane / Asphalt waterproof membrane for building waterproofing construction :

1. Torch on bitumen membrane sheets 4mm should be stored under dry and ventilated conditions.

2. Different types of membranes must be piled separately.

3. Under usual condition, storage period is one year since production date.

4. Membrane roll should be put vertically during transportation. It should be kept away from sunshine and rainwater.

Advantagee

Easy to apply (by torch)

Highly mechanical properties

Absolute impermeability to water

High elasticity at sever low temperature from -10°C up to -20°C

Resistant to chemicals attack probable to be existing in soil

Excellent high temperature performance

Excellent adhesion on any surface

High dimensional stability

Environmentally friendly

Applicable scope:

It is widely used for civil building roofing, underground, bridge, parking, pool, tunnel in the line of waterproofing and dampproofing, especially for the building under high temperature.

Product Range

Standard thickness available includes 3mm and 4mm. Some types could be available by weight 3kg/m2 and 4kg/m2.

Bottom surface finish is normally Polyethylene Film (PE).

Upper surface finish choices include:

Polyethylene Film (PE)

Fine Sand (S)

Mineral Slated Grey (GY)

Mineral Slated Green (GRN)

Mineral slated White (WT)

Mineral slated Red (RD)

Slated rolls are available in 4kg, 4.5kg and 5kg per square meter.

The nominal length of each roll is 10 meters and the nominal width is one meter.

Special specification can be designed based on client’s need

Storage:

Different types or specifications of products should be separated, not mixed.

Keep it dry and ventilated, protected from the sun or rain.

Storage temperature should never be higher than 45 °C. Pile up the membranes flatwise whose stockpile height never exceeds five layers. One layer is guaranteed if it is placed vertically.

Prevent it from inclination or In the process of transportation, it should be lying in case of inclination or lateral pressure. If necessary, cover it with felt-cloth.

Storage time is at least one year from manufacture date on if the product is under normal operation of storage.

Technical Parameters

Item		Index
Item
1	Thickness of resin layer of the middle fabric ,mm≥		-	-	0.40	0.40	0.40
2	Tensile performance	Max tensile strength,N/cm ≥	-	120	250	-	120
		Tensile strength,NPa ≥	10	-	-10	-	-
		Max elongation% ≥	-	-	15	-	-
		Breaking elongation % ≥	200	150	-	200	100
3	Heat treatment size change rate%≤		2.0	1.0	0.5	0.1	0.1
4	Cold bonding		-25°c No cracks
5	Watertightness		0.3mPa,2h waterproof