Elm Solar Panels - Solar Panel for Full Certificate, Solar Module Panel with Full Certificate

Product Description:

Product Description:

1.Structure of Solar Module Description

Solar panel refers either to a solar hot water panel, a common type of a solar thermal collector, or to one or more solar photovoltaics (PV) modules, electrically connected and mounted on a supporting structure.

A PV module is a packaged, connected assembly of typically 6×10 solar cells. Solar PV panels constitute the solar array of a photovoltaic systemthat generates and supplies solar electricity in commercial and residential applications. Each module is rated by its DC output power under standard test conditions, and typically ranges from 100 to 320 watts.

2.Main Features of the Solar Module

 1).High conversion efficiencies resulting in superior power output performance.

 2).Outstanding power output even in low light or high temperature conditions

 4).Long-term stability,reliability and performance

GENERAL SAFETY

1.    Consult local codes and other applicable laws concerning required permits on regulations concerning installation and inspection requirements.

2.    Before installation a PV module, contact appropriate authorities to determine permit, installation and inspection requirements that should be followed.

3.    Install PV modules and ground frames in accordance with applicable rules and regulations

4.    PV modules should be installed and maintained by qualified personnel. Only installer/service personnel should have access to the PV module installation site.

5.    No matter where the PV modules are installed, either roof mounted construction or any other type of structures above the ground, appropriate safety practices should be followed and required safety equipment should be used in order to avoid possible safety hazards. Note that the installation of some PV modules on roofs may require the addition of fireproofing, depending on local building / fire codes.

6.    Please use PV modules with same cell size within series.

7.    Follow all safety precautions of other components used in the system.

8.    In order to avoid a risk of injury or electrical shock, do not allow anyone to approach the PV module if the person has little knowledge on PV module or on the measures that should be taken when PV modules are damaged.

9.   Do not clean the glass surface with chemicals. Do not let water stay on the glass surface of PV modules for a long time. This creates a risk of white efflorescence(glass disease) which may result in the deterioration of energy generation.

10. Do not clean the glass surface with chemicals. Do not let water stay on the glass surface of PV modules for a long time. This creates a risk of white efflorescence ( glass disease ) which may result in the deterioration of energy generation.

11.  Do not install the PV module horizontally. It may cause dirt or white efflorescence (glass disease) due to water.

12.  Do not cover the water drain holes of the frame. There is a risk of frost damage when the frame is filled with water copulation.