Solar Panels Newcastle - High Quality Solar Module from CNBM

Product Description:

Product Description:

Solar Module

ABOUT YINGLI GREEN ENERGY

Yingli Green Energy Holding Company Limited (NYSE: YGE) is one of

the world’s largest fully vertically integrated PV manufacturers, which

markets its products under the brand “Yingli Solar“. With over 7.0GW

of modules installed globally, we are a leading solar energy company

built upon proven product reliability and sustainable performance. We

are the fi rst renewable energy company and the fi rst Chinese company

to sponsor the FIFA World CupTM.

PERFORMANCE

- High effi ciency, multicrystalline silicon solar cells with high transmission

and textured glass deliver a module effi ciency of up to 16.0%,

minimizing installation costs and maximizing the kWh output of your

system per unit area.

- Tight positive power tolerance of 0W to +5W ensures you receive

modules at or above nameplate power and contributes to minimizing

module mismatch losses leading to improved system yield.

- Top ranking in the “TÜV Rheinland Energy Yield Test” and the

“PHOTON Test” demonstrates high performance and annual energy

production.

RELIABILITY

- Tests by independent laboratories prove that Yingli Solar modules:

 Fully conform to certifi cation and regulatory standards.

 Withstand wind loads of up to 2.4kPa and snow loads of up to

5.4kPa, confi rming mechanical stability.

 Successfully endure ammonia and salt-mist exposure at the highest

severity level, ensuring their performance in adverse conditions.

- Manufacturing facility certifi ed by TÜV Rheinland to ISO 9001:2008,

ISO 14001:2004 and BS OHSAS 18001:2007.

WARRANTIES

- 10-year limited product warranty1.

- Limited power warranty1: 10 years at 91.2% of the minimal rated power

output, 25 years at 80.7% of the minimal rated power output.

1In compliance with our Warranty Terms and Conditions.

QUALIFICATIONS & CERTIFICATES

IEC 61215, IEC 61730, MCS, CE, ISO 9001:2008, ISO 14001:2004, BS OHSAS

18001:2007, PV Cycle, SA 8000

ELECTRICAL PERFORMANCE

Electrical parameters at Standard Test Conditions (STC)

Module type YLxxxP-29b (xxx=Pmax)

Power output Pmax W 260 255 250 245 240

Power output tolerances ΔPmax W 0 / + 5

Module effi ciency ηm % 16.0 15.7 15.4 15.1 14.8

Voltage at Pmax Vmpp V 30.3 30.0 29.8 29.6 29.3

Current at Pmax Impp A 8.59 8.49 8.39 8.28 8.18

Open-circuit voltage Voc V 37.7 37.7 37.6 37.5 37.5

Short-circuit current Isc A 9.09 9.01 8.92 8.83 8.75

Electrical parameters at Nominal Operating Cell Temperature (NOCT)

Power output Pmax W 189.7 186.0 182.4 178.7 175.1

Voltage at Pmax Vmpp V 27.6 27.4 27.2 27.0 26.8

Current at Pmax Impp A 6.87 6.79 6.71 6.62 6.54

Open-circuit voltage Voc V 34.8 34.8 34.7 34.6 34.6

Short-circuit current Isc A 7.35 7.28 7.21 7.14 7.07

STC: 1000W/m2 irradiance, 25°C cell temperature, AM1.5g spectrum according to EN 60904-3.

Average relative effi ciency reduction of 3.3% at 200W/m2 according to EN 60904-1.

NOCT: open-circuit module operation temperature at 800W/m2 irradiance, 20°C ambient temperature, 1m/s wind speed.

OPERATING CONDITIONS

Max. system voltage 1000VDC

Max. series fuse rating 15A

Limiting reverse current 15A

Operating temperature range -40°C to 85°C

Max. static load, front (e.g., snow) 5400Pa

Max. static load, back (e.g., wind) 2400Pa

Max. hailstone impact (diameter / velocity) 25mm / 23m/s

CONSTRUCTION MATERIALS

Front cover (material / thickness) low-iron tempered glass / 3.2mm

Cell (quantity / material / dimensions /

number of busbars)

60 / multicrystalline silicon / 156mm x 156mm / 2 or 3

Encapsulant (material) ethylene vinyl acetate (EVA)

Frame (material / color / anodization color /

edge sealing) anodized aluminum alloy / silver / clear / silicone or tape

Junction box (protection degree) ≥ IP65

Cable (length / cross-sectional area) 1000mm / 4mm2

Plug connector

(type / protection degree) MC4 / IP67 or YT08-1 / IP67 or Amphenol H4 / IP68

PACKAGING SPECIFICATIONS

Number of modules per pallet 29

Number of pallets per 40' container 28

Packaging box dimensions

(L / W / H) 1700mm / 1135mm / 1165mm

Box weight 568kg

Unit: mm

• Due to continuous innovation, research and product improvement, the specifi cations in this product information sheet are subject to change

without prior notice. The specifi cations may deviate slightly and are not guaranteed.

• The data do not refer to a single module and they are not part of the offer, they only serve for comparison to different module types

IMAGES:

WHAT'S THE ADVANTAGES OF CNBM?

1.CNBM is a state-owned company under jurisdiction of central goverment , one of  Fortune 500 .Just because of this ,we can get more support and resources from our government.So ,it is realiable .

2.CNBM's solar  products are high-qualified with TUV,UL,VDE,CE,ISO certificates. Our products ranges top in China.

3.Just as I mentioned in attahment ,we signed 500MW project with Urkan under the witness of our chairman Xi Jinping ,CNBM has ability to meet your large quantity needs,Our annual capacity is 1GW.