Loading Port:China main port
Payment Terms:TT OR LC
Min Order Qty:100 set
Supply Capability:10000 set/month
Features:
Elegant CUP design
Warm white lighting for decorating
Stainless Aluminum body
100% solar powered, wireless connection
Superbright LEDs,100Lumens
Over 2 nights long lighting time, Waterproof IP65
Specification | ||
Solar panel | 1.6W,17% efficiency | 10 years |
Li-ion battery | 3.7V 2000mAh | 500 cycles |
LED | 1W, 100lm, Warm white | 50,000Hrs |
Ray sensor | <10Lux | |
Lighting mode | 5Hrs high bright + 7 Hrs dim light | Switch timer |
material | Aluminum + ABS | |
Solar charging time | 7~8 hours by bright sunlight | 1000W/m2 |
Lighting time | Around 3 nights | Full charged |
Efficiency | >85% | |
Product size | 264mm(H)*dia160mm | Unit:mm |
Product Application Area：
Courtyard/Garden
Park
Roadway/pathway
Parking Lot
Private road
Sidewalk
Public square/ plaza
FAQ
1.How to install?
You can fix the product with the screw in the packing box and install the product on the area that needs illumination. Enough sunshine that can insolate the solar panel for charging has to be ensured. You have to pay attention that excellent effect of charging can be achieved when the solar panel has angle and no shelter and faces to the south area.
2.How to use and how to charge?
The product is off before delivery in order to avoid discharging during transportation. You can activate it by using the pin, take away the magnet, and face the solar panel to the sunlight or tearing off the film. This is depend on different item, the activate way may differ. Solar panel should be insolated with certain angle and charge in the daytime and bright automatically in the nighttime.
3.Dose the light illuminate in the daytime?
The light is optically controlled. It will not illuminate when there is enough light during the day. Once night falls, it will bright.
4.How is the effect of the PIR motion sensor?
The light will be in the energy saving mode when it is dark automatically, light will be off when it is dawn. With this characteristic, the light can be used as signal light, indicator light and continuous light.
PIR motion sensor light: Entering into the induction area when it is dark, the light will bright automatically and lasts for about 30 seconds, and then, it will turn to power saving mode.
