SLD series horizontal multi-stage pump

Product Description:

Product outline
SLD single-suction multi-stage sectional-type centrifugal pump is used to transport the pure water containing no solid grains and the liquid with both physical and chemical natures similar to those of pure water, the temperature of the liquid is not over 80 ,suitable for water supply and drainage in mines, factories and cities.
Note: Use an explosion-proof motorwhen used in a coal well.
This series pump comply with the standards of GB/T3216 and GB/T5657.
Performance range
Capacity(Q) 25-750m³/h
Head(H) 60-1798m
Pump structure
Model SLD pump consists of four parts, stator, rotor, bearing and shaft seal:
1.Stator consists of inlet, middle and outlet sections and the guide vane etc., with the take-up bolt tightly clamping all sections to form a working room. The inlet of it stands horizontally while the outlet vertically upward.
2.Rotor consists of the shaft, impeller, balancing disk and muff etc., the shaft passes the power to the impeller to have it work; the balancing disk balances the axial force; and replaceable muff is mounted on both sides of the shaft to protect it.
3.There are rolling and sliding bearings:The rolling bearing consists of bearing seat, bearing and bearing gland and uses grease for lubrication.The sliding bearing consists of bearing body and cover,liner, dust-proof disk, oil leveller, oil throwing ring etc., and uses thinned oil for lubrication.
4. The shaft is sealed with stuffing and the shaft seal consists of the sealing contents, stuffing, baffle. The liquid in the sealing work-room functions water-sealing, watercooling and water lubricating and the water for watersealing comes from the pressure water inside of the pump.Mechanical seal can also be used upon the requirement of client.
In addition, the pump is directly actuated by the prime mover through the elastic clutch and, viewing from the prime mover, moves CW.