Single Sided PE Foam Tape SSP-25YM For Industry

1. Single sided PE foam tape is with hot melt adhesive. Solvent based acrylic adhesive is also available as per customer's requirement.

2. There are three kinds of release liner: without liner, PE release film & release paper.

3. The foam is of white color and black color. Usually the PE release film is of red color, green color and blue color. The release paper is of white color and yellow color. So, you can match the foam & the release liner as you like, such as black PE foam wihtout release liner, black foam + red PE release film or white foam + white release paper.

4. Different foam density available, such as 32kg/m3 (30expansion), 64kg/m3 (15expansion) & 96kg/m3 (10expansion).

5. Single sided PE foam tape is used for auto trim attachment, signs, furniture industry, cushioning, sealing and so on.

6. Two standard ways for cut roll packing: one roll per shrink & one roll per plastic bag. We can also offer special packing as per customer's requirements, such as label, core printing and sticker.

Backing: White/Black PE Foam

Adhesive: Hot melt adhesive

Liner: White release paper

Total Thickness (adhesives + backing): 2.5 mm

Density: 32kg/m3

Initial tack: 6# steel ball

Holding power (hrs): >20h

Temperature resistance: 60-70℃

Elongation: 100%

 

Packing Of Single Sided PE Foam Tape SSP-25YM For Industry

Core I.D.: 3” (76mm?1)

Jumbo Roll：1280mm x 4000m

Cut Roll: As per customer’s requirements

 

Application  Of Single Sided PE Foam Tape SSP-25YM For Industry

Carton sealing & packing, Light duty packaging, bundling, holding, and other office & household use.

 

Service Of Single Sided PE Foam Tape SSP-25YM For Industry

We have a group of professional technicians and workers with rich experience, who are dedicated in this industry and try to offer best service to every customer. We are undertaking the idea of “reliable quality, reasonable price, and good service” to meet the needs of every customer. Your success is our goal, and your content is our hope. We keep pursuing “exact production, high-quality service”.

 

Handing and Storage Of Single Sided PE Foam Tape SSP-25YM For Industry

Handling procedures：Caution with edge of sheet. After using this sheet, wash hands.

Storage procedures：Keep dry and cool and away from direct sunlight for quality.

 

Stability and Reactivity Of Single Sided PE Foam Tape SSP-25YM For Industry

Chemical Stability: Stable and non-reactivity

Conditions to Avoid: Away from high temperature

Incompatibility with various substances：specific materials／condition to avoid．

Hazardous Decomposition Products：Thermal decomposition will produce mainly C02，and slightly CO．

Hazardous Polymerization：Can not occur

 

Transport Information Of Single Sided PE Foam Tape SSP-25YM For Industry

Not a hazardous material for DOT shipping．

UN：None

Packaging sign：According to the buyer

Packaging Category：No information found/According to the buyer．

Shipping Marks: According to the buyer

 

Remarks Of Single Sided PE Foam Tape SSP-25YM For Industry

The data above are typical results and subject to change without notice.

Tolerance: Weight and Thickness: 10%; Width: 3mm; Length: Cut Roll & Log Roll 0.3m, Jumbo Roll 0.5%.

The products should be stored at room temperature and be kept away wet and/or heat source.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.

The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.