Single component Polyurethane waterproofing coating

Product Description:

01 Product introduction Product Introduction

Single-component polyurethane waterproof coating, the main components of isocyanate, polyether polyol, and a variety of functional additives prepared by the reactive elastomer waterproof coating. Its waterproof film forming mechanism is to cure cross-linking with water vapor in the air after contact, forming a three-dimensional network structure, forming a layer of flexible and strong overall waterproof film on the surface of the substrate, so as to achieve a better waterproof effect.

02 Product characteristics

1. High construction efficiency, convenient and fast: single component, ready to use;

2. Good mechanical properties: reactive waterproof material has large tensile strength, high elongation, strong adaptability to base cracking and expansion;

3. Low temperature flexibility is very good :-35℃ bending without cracks, ordinary waterproof materials can not do, suitable for low temperature waterproof projects;

4. Strong bond with the base: no need to brush the base treatment agent, the bond strength can reach 1.0MPa;

5. Excellent water resistance: wet curing reactive polyurethane coating, the coating is dense, no pinholes, no bubbles, water permeability coefficient is small, can be waterproof and can be used as a gas insulation layer;

6. Green environmental protection: the use of low volatile solvent, non-dangerous goods. Does not contain benzene, toluene, xylene and other harmful solvents.

03 Applicable scope

1. Basements and roofs of industrial and civil buildings, large venues;

2. Subways, tunnels, Bridges;

3. Kitchen bath room, swimming pool, water channel;

4. Parts with complex shapes that are not easy to coil construction, such as vertical and horizontal parts of pipelines.

04 Packaging and storage andtransportation

1. Pay attention to safety during storage and transportation, avoid sun and rain, prevent extrusion collision, stay away from fire source and heat source, pay attention to ventilation and drying.

2. Storage temperature should be 5-40℃.

3. Under normal storage and transportation conditions, the storage period is 6 months.

【 Product Specification 】20Kg/ barrel