FRP Roofing Panel - Fiberglass Panels for Diverse Applications

Product Description:

Brief Introduction

the FRP anti-corrosion panel are produced in the same production line with FRP skylight panel, it has greater and more requirements of the professional technology. There are only a few of the manufacturers who can produce FRP opaque panels in China. A lot of FRP opaque corrugated panels have quality problems after intalled. Higoal is a mature manufacturer in producing FRP opaque corrugated panel (anti-corrosion panel), and has great advantages in both quality and lower cost.

Characteristics  

Mechanical properties: high rigidity lighting panels
　　Plate matches: match with general prepainted galvanized sheet, galvanized steel
　　Resin composites: Improved anti-aging SMR198 resin
　　Fiber reinforcement: E-glass fiber untwisted without glue
　　Surface treatment: affixing MELINEX301 film
　　Stiffener line: surface with longitudinal uniform distribution of anti-LAC gluten

Technical Specification
　　Glass fiber: not less than 28%
　　Unit Weight: 1800g / ㎡， 2400g / ㎡， 3050g / ㎡
　　Nominal thickness: 1.2 mm, 1.5mm, 2.0mm （tolerance ≤ 10%）
　　Temperature limits: -60 ℃ ~ +130 ℃
　　Transmittance （1.5mm）： 72% ± 2% （fog white, sky blue, water green）， 52% ± 2% （white porcelain）
　　UV-rate: 99%
　　Tensile strength: 90Mpa
　　Flexural strength: 160 Mpa
　　Elongation: 1.9%
　　Pap hardness: ≥ 50
　　Thermal expansion coefficient: 1.5 ~ 3.2 * 10-5 / K
　　Thermal conductivity: K = 0.23W / m * K
　　Guarantee: 15 years
　　NOTE: In special cases, the surface film varieties vary according to needs, such as Melinex389, PT055 and so on.

FAQ

Better property of corrosion resistant than clading panel and stainless steel, it was designed for the harsh conditions, which require products that can withstand corrosive chemicals, high temperature.