Resilient seated double eccentric butterfly valve

Product Description:

1.Technical Date:

Size: DN100-DN4000

Nominal Pressure: PN10/PN16

Operation Temperature: -10°C~150°C

Suitable Medium: Water,Sewage,Seawater,Gas,Food,Oils,etc.

2. Standard

Design Standard: GB/T 12238-2008

Structural Length: GB/T 12221-2005

Top Flange dimensions: ISO5211

Face to face dimensions: GB9112,DIN2501,BS4504,ISO2084,ANSI125

Type of connection: Flange Type

3.Feature:

Product adopts double eccentric structure, the disc sealing ring at the instant of the opening and closing should quickly out of the seat, which can effectively avoid the valve opening and closing process, the seat of the valve plate interference and friction, extend the life of the seal ring. The valve plate adopts the structure light truss over current or pressure on the pressure surface streamline structure design, wide open, the seat effective circulation channel cross-sectional area is big, can greatly reduce the flow resistance of butterfly valve, at the same time guarantee the overall structural strength.

Copper brass seat is surfacing on the valve body, ensuring that no leakage in use. Copper seat smooth level off, solid, corrosion resistance is strong, coaxial degree is high, low surface roughness, cooperate with the seal of the valve plate seal.

Valve shaft adopts two stages, increases the flow area of the flow channel, the valve stem is not easy to hang for sundry, valve spindle insert valve body, valve plate length not less than 1.5 times the diameter of axle, the shaft end due and axial positioning, prevent the butterfly plate used in industrial and mining conditions in axial string.

Butterfly plate and the valve shaft connected with 1:50 taper pin, and seal the pin with a ring, to ensure the stability of the pin connection and sealing. Taper pin with high strength stainless steel materials.

Valve plate seal to the "T" shape structure, the "T" ring material elastic sealing and not just at the same time, with flexible structure, seal with pressure self-tightening and seal pressure compensation function, positioning clamp screw can make rubber ring at the same time, prevent seal up, roll and rubber flabby bumps, make each sealing point sealing force equilibrium, seal wear less, the effect is good. Sealing ring by removing pressure ring can be directly in the line with adjustment, repair and replacement. Maintenance convenient quickly. And ensure the enough strength, pressure adjusting screw is divided into two groups, one group for compression screw, compression screw has limited pressure functions, a group of the adjusting screw, effectively adjust the seal position, guarantee the best sealing performance, and balance the force situation of every screw, compression screw with washer, prevent water impact vibration and make the screw loose fall off.