T111 Plywood Radiate Pine LVL Scaffolding Plank with OSHA for Construction

Product Description:

LVL Scaffolding Plank

 Laminated Veneer Lumber Scaffolding Board for construction

Features:

1) Dimensions: length: 1980/2980/2500/3900/3980/5980( length within 12 metres)

width: 220/225/230mm

thickness: 38/39/42mm

we may manufacture kinds of sizes according to clients' requirements.

2) Material: Radiate Pine from New Zealand

3) Adhesive: WBP glue ( Environment Friendly )

4) Produce Ability: 60,000CBM/Year

5) Standard:

We are applying an inspection certification from third party agency, now we are instructed under its China agent.

6) SGS Test Report by according AS 1577-1993

7) Usage:

LVL is used primarily as structural framing for residential and commercial construction and is well suited to applications where open web steel joists and light steel beams might be considered. Others uses include scaffold planking and as flange members for some proprietary prefabricated wood I-Joists. LVL can easily be cut to length at the jobsite.

Application: For use as scaffold platforms or decks in accordance with U.S. Department of Labor Regulations (OSHA) or British Standards

Material: Structural laminated veneer lumber (LVL)

Standards: AS/NZS 4357:1995 Structural laminated veneer lumber GB/T 20241- 2006 Standard for laminated veneer lumber ANSI A10.8 – 2001, Safety Requirements for Scaffolding OSHA, Occupational Safety & Health Administration, U.S. Dept. of Labor, Regulations (Standards – 29 CFR) Scaffold Specifications – 1926 Subpart L, Appendix A BS 2482 Specification for Timber Scaffold Boards

Species Used: Plantation forest Radiata Pine

Adhesive & Bond: Phenolic, Type A (WPBP) Bond

Section Size: 38、39、42mm thick x 220、225、230mm wide (Tolerances, -0, +2mm)

Moisture Content: 6% to 18%

Lengths: To customer specification up to 12000mm (Tolerance, -0mm, +10mm)

Approximate Mass: 580kgs/M3

Strength & Stiffness 1) Batch sampling of LVL from production and testing for Verification: Modulus of Elasticity and Modulus of Rupture 2) Boards proof loaded and rigidity measured for verification of strength claims

Edge Branding: OSHA, BS2482, PROOF TESTED SCAFFOLD BOARD, MM/YY

Finish: Unsanded faces, sawn edges, arrisses chamfered (to prevent splintering), ends painted (to inhibit moisture egress/ingress)