PVC insulated 0.6/1KV 35mm 4 core Power Cable

Product Description:

Specifications

4 core Power Cable 
1.0.6/1kv power cable 
2.House Power Cable 
3.35mm Electric Cable

                PVC insulated 0.6/1KV 35mm 4 core Power Cable 

Product Description

Specification

    4 core Power Cable 
  1.0.6/1kv power cable
  2.House Power Cable
  3.240mm2 Electric Cable

1, Cores and sections

  1,  2,  3,   3+1,   3+2,    3+3,  4,    4+1,    4+2,   5 and so on.

2.No. Of Core and Sectional Area(mm2) :
  1 Core :10~630 mm2
  2 Core :2x4~2x185 mm2
  3 Core :3x4~3x300 mm2 
  4 Core :4x4~4x400 mm2

  3+1 Core :3x4+1x2.5mm2~3x400+1x185mm2
  3+2 Core :3x4+2x2.5mm2~3x400+2x185mm2

  4+1 Core :4x4+1x2.5mm2~4x400+1x185mm2

3, Construction:

  Conductor: Solid or stranded copper 
  Insulation: Cross-linked polyethylene (XLPE) or Polyvinyl chloride (PVC) 
  Filler: Polypropylene filament with lapped binding tape 
  Binder: Binding tape 
  Inner sheath: Polyvinyl chloride (PVC) 
  Amour: Galvanized steel wire armored(SWA) or steel tape armored(STA) 
  Sheath: Polyvinyl chloride (PVC) 

4. Operating Features:
 1)The maximum conductor operating temperature: 90°C
During short circuit (lasting less than 5 seconds) the maximum temperature of the cable conductor shall not be above 250°C
Environment temperature should be no lower than 0°C for laying the cable.
2)Bending Radius of the Cable:
Single Core Cable: Non Armored Cable 20D, Armored Cable 15D
Cores Cable: Non Armored Cable 15D, Armored Cable 12D.
 Remarks: D means practical external diameter of the cable

 5.Standard:

  IEC60502,and BS6346, VDE, AS/NZS, UL,etc or as customer's request.

 6. The Rated Voltage(kv):

1st class 0.6/1 1.8/3 3.6/6 6/10 8.7/15 12/20 18/30 21/35 
2nd class 1/1 3/3 6/6 8.7/10 12/15 18/20 - 26/35

 7. Application:

1)These cables are most suitable for direct burial or for installation on trays or ducts,  Where there is
a risk of mechanical damage, armoured cables should be used.

2) For laying in ground along route with large difference of level able to bear external mechanical forces.

8. Model and Name