Purple aika ceramics is now 800 Bai Jujing preferential activities

Product Description:

  1, no radioactive elements: natural stone material is a mineral, without high temperature sintering, it contains individual traces of radioactive elements, contact for a long time will be harmful to human body; Polishing brick will not cause harm to human body.

. 2, the basic can be controlled without off color: natural stone material, due to the time of rock, rock depth different color difference is bigger, polishing brick, pesto with batch of product design and color is consistent, basic without off color.

3, resistance to bending strength: natural stone material due to natural form, timber, weathering, etc is not the same time, lead to different degree of density, strength; Polishing brick by thousands of tons of hydraulic press pressing, then through above 1200 ℃ high temperature sintering, high strength.

. 4, thin, light weight brick: natural stone material due to the low strength, so the processing thickness is larger, bulkier, increase the load on the floors of the building, a potential threat, costs, and increase the transportation, the shop is stuck, etc.

•

The shortcoming of polished tile:

, 1, since it is polished, the problem also follows, because of the smooth, bright, so it is not resistant to dirty, with a mop after drag, will have water mark, because it is impossible for your mop is that 100% of the clean, like clean the Windows, so if you want to clean, just more work.

•

, 2, is polishing for smooth, so also will not prevent slippery, that is to say, once the ground water, is very smooth, which is why you see building general stair place such as shop inside Shi Cai without ChengLiang light, but is inferior smooth, only in this way can prevent slippery.

, 3, easy is colored liquid infiltration, * * * simple test is done with the pen words written on the surface of tiles, poor polishing, wipe immediately after you finish all can not clean, the handwriting might have infiltrated the, good brand, and because the press is good, high density, and firing temperature is high, the density is very high, so it is not easy, but it's not yes, it is a good polishing, if written words to wipe again ten minutes later, after must also leave traces of always wipe not to go, because the ink has infiltrated into the brick