PPR-Fitting Male Threaded Elbow With SPT Brand 500 strength enterprises

Product Description:

Product characteristics of PPR waisi bend products:
1. use hygiene, and non-toxic, corrosion resistant, to prevent scaling;
2. the product transportation noise is small, the structure is beautiful;
3. low thermal conductivity, good heat preservation;
4. use hot melt connection, can be melted into one, without leakage;
5. water resistance small, smooth inner wall and fast flow velocity;
6. high temperature resistance, up to 95 degrees, high pressure;
7. long service life, under normal use, can be more than 50 years;
8. widely used in water supply, drainage, sewage, heating, electricity and farmland.
Characteristic:
1. discharge capacity, not aging, especially suitable for edible water, straight drinking water, food enterprise water
2. cold water, tongreshui ( 120 ° c ) is the best choice for heating geothermal pipe
3. but the gas inside and outside the indoor, using natural gas ventilation
Mounting method:
1. remove the " Huitong" by saw or mill according to desired length
2. use the mill to remove the pipe end hair, and scrape the burr off the pipe in the pipe
3. press the inner yamu or waiyamu into the outside, the inner link shall be inserted into the pipe, the pressure plain end, and placed in the abrasive inner pressure, the gasket sleeve can be installed. ( must not be omitted )
Attention matters:
1. the sealing ring of inner connecting sleeve is installed smoothly without distortion
2. when cutting the pipe, require the incision and pipe to be as 90 as possible.

Product photos as follows :

Product specification as follows:

Details of the product warehouse are as follows:

‍