Solar Panels San Luis Obispo - Polycrystalline Silicon Solar Panels 315w

Product Description:

INTRODUCTION

This installation Manual contains essential information for the electrical and mechanical installation that your must know before installing CUSTOMER PV modules. This also contains safety information you need to be familiar with .All the information described in this manual are the intellectual property of CNBM and based on the technologies and experiences that have been acquired and accumulated in the long history of CUSTOMER. This document does not constitute a warranty, expressed or implied.

CUSTOMER does not assume responsibility and expressly disclaims liability for loss, damage, or expense arising out of in anyway connected with installation, operation, use or maintenance of the PV modules. No responsibility is assumed by CUSTOMER for any infringement of patents or other rights of third parties that may result from use of PV module.

CUSTOMER reserves the right to make changes to the product, specifications or installation manual without prior notice.

WORK PRINCIPLE

Process is as follows:  

1, the battery test

2, positive Welding - Inspection –

3, on the back of cascading - Inspection –

4, laying (glass cleaning, material cutting, glass pre-processing, laying) –

5, laminating –

6, to flash ( to the side, cleaning) –

7, fitted border (glue, loading angle keys, punching, install box, scrub I glue) –

8, the welding junction box –

9, high-pressure test –

10, component testing -- -

11 appearance inspection, packaging and storage;  

COMPONENTS

Data sheet