Loading Port:China Main Port
Payment Terms:TT or LC
Min Order Qty:1 Set pc
Supply Capability:3000 Sets per Month pc/month
Obstruction light for a wide variety of cranes used in Harbors, Metallurgies, Towers (Telecom, GSM), Smokestacks, Buildings
Main fuctions and features:
• Use Fresnel lens, high utilization of light, valid keeping light beam in the scope as required
• Based on LED technology, low power consumption, and high effecience
• Die casting aluminum enclosure with powder-coat paint finishes, providing corrosion resistance and durability
• Extremely Reliable – Major Maintenance Cost Saving
• G3/4”pipe is available, ease of mount
• EMC Compliance, No RF Radiation
• Self-contained compartment, with stainless steel wire which is used to secure the unit against falling in operation, and ease of mount
• Lamp housing – Polycarbonate, with good anti-impact strength, thermal stability, high transmittance
• Built-in photocell can switch ON/OFF the light at dawn and dusk (optional)
• Steady burning or flashing type (no need external controller).
Specification
Standard | Compliant to the ICAO(Aerodromes Annex 14) and FAA-L810 | Vertical degree | ≥10 |
Light source | LED | Horizontal degree | 360 |
LED color | Aviation red | Flashing rate | Steady burning or flashing(flashing rate can be selected) |
Operating voltage | AC110V~AC240V(Option:DC48V) | LED life | ≥100,000h |
Power consumption | 6W | On/off level | 500Lux |
Intensity | ≥32.5cd | ||
Operating temperature | -30C ~ +70C | IP Protection | IP65 |
Relative humidity | 10% ~ 95% (no condensing) | Weight | 1.0kg |
Material | Base:Die casting aluminum, housing: PC | ||
Installation and operation
• Check whether the supply voltage does comply with the rated voltage of the lamp (Pay attention to the polarity in case of DC voltage).
• Insert the power cable through the bottom of lamp holder, and connect them to the terminals in the base respectively
• Select the flashing mode as required
• Tighten the screws between lamp housing and base
• Screw the lamp on the G3/4” ( G1”) threaded pipe, which should be fixed on a smooth surface with enough mechanical strength. Or you can select our mounting bracket: PJ024, PJ028 and PJ030 (installing diagram), special bracket can be customized.
• Verify whether the power cables are well connected before power on.
