Micro X-ray fluorescence

Product Description:

M1 ORA is specifically applicable to the jewelry industry, desktop micro X-ray fluorescence (μ-XRF). Compact, small footprint.

Technical parameters:

Specifications

High-performance micro-focus light source tube, tungsten target, windows

Voltage, power 40 kV, 40 W

1100mm2 large area proportional counter detector sensing area

Spot size 0.3 - 1.0mm collimator (factory setting)

High-resolution color imaging system observed sample, 20-40 times magnification

Sample manual sample stage scissor lift

Quantitative analysis of empirical model based on the standard sample

No standard model based on the fundamental parameter method

Power 230V / 50 Hz, 100 W

Dimensions 355 × 330 × 330 mm

Weight 26 kg

Main features:

M1 ORA can accurately determine the elemental composition of the alloy jewelry, elemental analysis range: all the elements of atomic number 22 (titanium) above.

The illuminated light pipe, a small spot size to 0.3mm, the complex pattern of the sample can be a non-contact, non-destructive analysis, the results can be obtained within minutes.

Sample sizes up to 100 × 100 × 100mm, without any treatment, directly on the sample stage is detected using an optical microscope for accurate positioning.

Using a large sensor area proportional counter sample emitted fluorescence signal is received. Signal acquisition, the more accurate the results. Content elements can be detected in more than 0.5%.

Based on standard or non-standard model model can identify and quantify all the elements in the sample. High accuracy and precision of 0.2 wt%. For it is not expected to be able to analyze the elements.

Fineness of gold analysis can be used K (open) or mass percentage (%) said.

XSpect package provides the following features:

Instrument control, data acquisition and processing

Peak identification

Quantitative analysis of the components, no standard method and empirical models based on the standard sample

Report Output

Jewelry, gold, precious metals analysis

Jewelry and precious metal jewelry, money is not the main part by the design and production of artificial decision, but the most important is determined by the type and quality of the precious metal alloy composition and gemstones. Several alloys known analytical methods for accurate fire oldest MediaTek, the first use of high-density high-precision weighing scales original piece of metal, non-metal material is then removed by unsynchronized outs (oxidation and dissolution), and finally weighing more than the amount. But this method so good, but need to destroy the sample, colleagues also produced a lot of toxic pollutants and gases.

X-ray fluorescence is non-basic and non-destructive analysis method colleagues can be analyzed with high accuracy of the test results

Because jewelry pieces are usually very small, and some are using different expensive is a gold portfolio, X-ray fluorescence spectrometer analysis process can be employed collimator within the instrument will inspire the X-rays focused on a small point, precise Yan policy sample composition .

X-ray fluorescence measurements can be widely applied to a large number of gold alloy series, measurable materials including gold, silver, copper, palladium, platinum, rhodium, gold and other precious metals element composition range of 35% (8 kt / K) ~ 100% (24 kt/ K)

Applies to: platinum, gold, platinum alloys, silver alloys, analytical accuracy of better than 0.2%