Loading Port:Shanghai
Payment Terms:TT OR LC
Min Order Qty:1 unit
Supply Capability:10 unit/month
| cnc milling machine price | ME745 | |
Capacity | X axis travel/mm | 700 |
Y axis travel/mm | 450 | |
Z axis travel/mm | 510 | |
Spindle nose to table surface/mm | 150-660 | |
Spindle nose to column surface/mm | 520 | |
Worktable | Table size/(L*W) | 850*450 |
Max load on the table/kg | 400 | |
T-slot size/mm | 18*3*110 | |
Spindle | Spindle speed/rpm | 60-8000 |
Spindle taper/spindle shank | 7/24 Taper BT40 | |
Max spindle inner diameter/mm | Φ70 | |
Spindle motor/kw | 5.5 | |
Feed rate | X,Y,Z rapid traverse/M/min | 24/24/24 |
Max cutting feed rate(M/min) | 10 | |
Guide rail types | Linear guide rails | |
A.T.C | Tool storage capacity/pc | Arm type 24 |
Max tool diameter(adjacent tools)/mm | Φ150(80) | |
Max tool length/mm | 300 | |
Max tool weight/kg | 8 | |
Tool change time(T-T)/sec | 2.5 | |
Accuracy | Repeatability positioning accuracy/mm | ±0.006 |
Positioning accuracy/mm | ±0.01 | |
Machine size | Space requirement(L*W) | 2730*2200 |
Machine height/mm | 2330 | |
Net machine weight/kg | 4500 | |
Power requirement/KVA | 15 | |
Air pressure/kg/cm2 | 5-7 | |
X.Y.Z axis Drive motor/kw | 1.8/1.8/2.5 | |
Control system | Siemens 808D |
Machine Configuration | 1.Control system: Siemens 808D |
2.Arm type A.T.C system(24 tools) | |
3.Chain type chip removal system | |
4.heat exchanger | |
5.triaxial screw rod with function of pre-pull | |
6.automacti lubrication system | |
7.work& alarm lamps | |
8.rigid tapping | |
9.steel telescopic covers for guide rails | |
10.dirt-proof electrical cabinet | |
11.paralell and tool box | |
12.220/380v,50HZ transformer | |
13.belt-type 8000 rpm spindle, 7/24 Taper BT40 , | |
14.spindle blowing device | |
15.fully enclosed splash guard | |
16.device for clamping/releasing tool | |
17.cutting fluid system | |
18.Linear guide rails | |
cnc milling machine price Main components supplier | 1.controller: Siemens 808D controller from German |
2.spindle motor: Mengde from Guangzhou | |
3.x. y. z axis motor: Mige servo motor from Hangzhou | |
4.spindle bearing: NSK (P4 grade) from Japan | |
5.x, y, z axis bearings: NSK (P4 grade) from Japan | |
6.x, y, z axis ball screw: HIWIN(C 3 grade) from Taiwan | |
7.spindle: Kenturn brand from China Taiwan | |
8.A.T.C: made in China Taiwan | |
9.cylinder: made in China Taiwan | |
10.heat exchanger: made in China Taiwan | |
Optional cnc milling machine price | 1.CNC Controller, FANUC, Mitsubishi,Siemens. |
2.Add 4th or 5th axis. | |
3.With or Without A.T.C System. | |
4.Spindle speed 10000rpm | |
5.Spindle Oil cooler. | |
6.Any more demands are available. |
