Masking Tape M091C

Product Description:

 General Information of Masking Tape M091C

 1. PACKING:

Core I.D.: 3” (76mm +/- 1)

Jumbo Roll：990mm x 1700m; 80 rolls/20' without pallets

Cut Roll: As per customer’s requirements; fistly several rolls shrink together, then certain quantities into a carton, finally be loaded into container with or without pallets.

 2. Application:

 Interior paint masking, silk screening, painting autos, boats, and Electrical industry.

 3. Temperature resistance: 80C for 30 minutes

 4. Colors available: White, light yellow, yellow, blue, black, red, green etc.

 5. We could supply OEM service such as core printing with customer's LOGO; round label with design of customers etc.

 6. Special requirements will be satisfied after communications.

Technical Data of Masking Tape M091C

 CONSTRUCTION:

Carrier: Crepe Paper
Adhesive: Rubber based adhesive.
TYPICAL PHYSICAL PROPERTIES:
Total Thickness (adhesives + carrier): 0.140 +/- 0.005 mm
Initial Tack:  8#
180 Peel Adhesion (to steel):  0.75kg /25mm
Holding Power:  11 hrs
Tensile Strength:  25 N/cm
Elongation: ≤20%
Temperature resistance: 80C (30 minutes)

Remarks of Masking Tape M091C

1. The data above are typical results and subject to change without notice.

2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm;

Length: Cut Roll & Log Roll ±0.3m, Jumbo Roll ±0.5%.

1. The products should be stored at room temperature and be kept away wet and/or heat source.

2. It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.

3. The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.