Loading Port:China main port
Payment Terms:TT or LC
Min Order Qty:2 m.t.
Supply Capability:200 m.t./month
1.Structure of Luminous Paint,Se-lett,Phosphorescent Paint
Luminous Paint (Photoluminescence paint) is a new kind of paint which is glowing in the dark with the function of lighteningThe product is a kind of quick-drying thermoplastic acrylic acid.Easy to operate,with good atomization and sufficient spray.The paint coating is quick drying hard,thick and has an excellent luster adhesion.
2.Main Features of the Luminous Paint,Se-lett,Phosphorescent Paint
• Very fast drying.
• Good adhesion.
•Excellent resistance to water and weathering.
3. Luminous Paint,Se-lett,Phosphorescent Paint Images
4. Luminous Paint,Se-lett,Phosphorescent Paint Specification
TYPE | Antirust paint based on alkyd resins with red oxide pigments. | |
USES | Antirust under coat for steel. | |
CHARACTERISTICS | 1. Very fast drying. 2. Good adhesion. 3. Excellent resistance to water and weathering. 4. Reality low cost. | |
GLOSS | Flat | |
COLOR | Gray | |
WEIGHT | Above 1.3 kg/L | |
VISCOSITY (25 °C) | 90 - 100 KU | |
DRYING TIME (25 °C) | Set-to-touch Dry hard | 0.5 hrs. 2 hrs. |
OPTIMUM FILM THICKNESS | Wet Dry | 90μ(microns) 40μ(microns) |
OVERCOATING INTERVALS (25°C) | Min. 6 hrs. | |
NON-VOLATILE CONTENT | Above 65% | |
THINNER | Toluene | |
THINNING RATE | 70~%(depends on tools used) | |
APPLICATION METHOD | Airless Spray, Brush, Roller. | |
NOTE | 1. Moisture, grease, rust, dirt and loose paints film on substrate must be removed. As a result, paint performance can be ensured. 2. Before application, stir paint evenly. When paint is too thick, thinner can be added within specified quantity 3. Application should avoid the following environment: rainy day; substrate is damp by dew; temperature is above 40°C or below 10°C. 4. Subsequent coat has to wait until paint films of preceding coat completely dry off. | |
5.FAQ of Luminous Paint,Se-lett,Phosphorescent Paint
① The Directions？
1. Remove thoroughly the oil, soil, water stain and dust from the surface to be sprayed.
2. Shake the can well for about half a minute before spraying.
3. Apply first on an invisible part to make sure the selected color is well matched
4. Keep 15-30 cm away from the surface to be sprayed.
5. In case of little paint or only gas out, turn the nozzle 180° and try again.
6. During spraying, keep the can upright within a vertical angle of 45°.
7. After use, clear the valve and nozzle by spraying upside down for a few seconds.
②What's the usage？
Appliance Paint,Boat Paint,Building Coating,Car Paint,Electrical Insulating Varnish,Furniture Paint,machine.
③How about your company？
A world class manufacturer & supplier of castings forging in Spray Paint.This is a manufacturer of tin product,such as aerosol can,food can,beverage can and so on,we began to supply service,and main service is : shaving foam,insecticide,air freshener,super carb cleaner,dash board polish,furnithure polish,polyurethane foam,leather polish,etc.
With advanced machine and perfect insect system,quality of every product are well guaranteed.
