LP series vertical turbine long axis deep well pump

Loading Port:Shanghai

Payment Terms:TT OR LC

Min Order Qty:-

Supply Capability:500 unit/month

Product Description:

Product outline
LP vertical turbine long axis deep well pump is mainly used for pumping clean water or waste water which are non corrosive,the temperature lower than 60℃ and of which suspended
substances are free of fibers or abrasive particles, concentration is less than 150mg/L.
On the basis of LP type pump, LPT type is additionally fitted with muff armor tubing with lubricant inside, serving for pumping of sewage or waste water, which are at the temperature lower than 60 and contain certain solid particles, such as scrap iron, fine sand,coal powder, etc.
LP(T) Type Vertical Discharge Pump is wide applicability in the fields of public work, steel and iron metallurgy,chemistry, paper-making, tapping water service, power station and irrigation and water conservancy, etc.
Operational conditions
1.The temperature of medium shall not be higher than 60 .
2.The medium shall be neutral and PH value between 6.5~8.5. If the medium is not consistent to the requirements, specify in the order list.
3.For LP type pump, the content of suspended substances in the medium shall be less than 150 mg/L; for LPT type pump,the max. Diameter of solid particles in the medium shall be less than 2 mm and the content less than 2 g/L.
4.LPT type pump shall be connected with clean water or soapy water outside to lubricate the rubber bearing. For twostage pump, lubricant pressure shall not be less than operational
pressure.
5.The first stage impeller of pump shall be immersed in 0.5m above at min. water level and generally it is suggested to be within 2~3 m.
6.The wellbore shall be straight.
7.Specify the depth of well or under-liquid depth of pump in the order list.
8.Special operational condition is subject to agreement or technical agreement.
Performance range
Flow:8 m³/h ~ 60,000 m³/h
Head: 3m ~ 150m
Power: 1.5 kW~3,600 kW